Category: JCN Newswire

Tokyo and Kawasaki, Japan, August 25, 2025 - (JCN Newswire via SeaPRwire.com) - Shibaura Institute of Technology (Associate Professor Takuya Otani, Faculty of System Science and Engineering [Human Robot System Laboratory]), Waseda University (Professor Atsuo Takanishi, Faculty of Science and Engineering), and Fujitsu Limited today announced the development of an innovative method for efficiently controlling robot posture using quantum computing technology. This new approach facilitates the efficient and accurate calculation of inverse kinematics, i.e., determining joint angles from a target end-effector position, for multi-joint robots by leveraging qubit-based position representation and quantum entanglement. Verification using Fujitsu's quantum simulator achieved up to a 43% error reduction with fewer calculations compared to conventional methods. The effectiveness of quantum entanglement was also confirmed through an experiment carried out on the 64-qubit quantum computer jointly developed by RIKEN and Fujitsu.By expressing the orientation and position of each robot link as a qubit, and by replicating the structural influence of parent joint movements on child joints through quantum entanglement, the number of necessary calculations was significantly reduced compared to conventional classical methods. As quantum computing advances towards practical application, this development is expected to contribute substantially to the creation of next-generation robots that demand real-time control and complex operational capabilities.Quantum technology breakthrough for complex robot posture calculationIn robot posture control, calculating inverse kinematics is crucial. For robots with multiple joints, the possible angle combinations are numerous, requiring iterative calculations to minimize the discrepancy from the target position and resulting in a high computational load. For a full-body multi-joint model with 17 joints, equivalent to the number of joints in the human body, the number of possible calculations required are too vast to be solved directly. A common approach has been to perform motion calculations with an approximated 7 joints, but this limits the smoothness of movement.In this research, a new method leveraging the power of quantum computing has been proposed to address these challenges. The orientation and position of each robot part (link) are represented by qubits, and forward kinematics, i.e., calculation of end-effector position from joint angles, is carried out using quantum circuits. Inverse kinematics calculations are performed on classical computers, achieving efficient posture control through a hybrid quantum-classical approach.Improved convergence speed and accuracy with quantum entanglementFurthermore, by introducing quantum entanglement, the structure where the movement of parent joints naturally influences child joints is reproduced on the quantum circuit. This significantly improved the convergence speed and accuracy of inverse kinematics calculations. In addition, a trial calculation showed that motion calculations for a full-body multi-joint model with 17 joints can be executed in approximately 30 minutes.Expected applications in humanoid and multi-joint robotsThis method can express the posture of multi-joint robots with a small number of qubits, making it implementable even in current noise intermediate-scale quantum (NISQ) computers. In the future, this technology could be applied to real-time control of humanoid robots and multi-joint manipulators, obstacle avoidance, and energy optimization. Further performance improvements are also anticipated through combination with advanced quantum algorithms such as quantum Fourier transform.Research paper detailsAuthors:- Takuya Otani, Shibaura Institute of Technology, Faculty of System Science and Engineering- Atsuo Takanishi, Waseda University, Faculty of Science and Engineering- Nobuyuki Hara, Fujitsu Limited- Yutaka Takita, Fujitsu Limited- Koichi Kimura, Fujitsu LimitedTitle: Quantum computation for robot posture optimizationJournal: Scientific Reports, Nature PortfolioDOI:10.1038/s41598-025-12109-0About Shibaura Institute of Technology (SIT), JapanShibaura Institute of Technology (SIT) is a private university with campuses in Tokyo and Saitama. Since the establishment of its predecessor, Tokyo Higher School of Industry and Commerce, in 1927, it has maintained “learning through practice” as its philosophy in the education of engineers. SIT was the only private science and engineering university selected for the Top Global University Project sponsored by the Ministry of Education, Culture, Sports, Science and Technology and had received support from the ministry for 10 years starting from the 2014 academic year. Its motto, “Nurturing engineers who learn from society and contribute to society,” reflects its mission of fostering scientists and engineers who can contribute to the sustainable growth of the world by exposing their over 9,500 students to culturally diverse environments, where they learn to cope, collaborate, and relate with fellow students from around the world. Find out more: https://www.shibaura-it.ac.jp/en/About Waseda UniversityWaseda University was founded in 1882 with the founding principles of “Independence of Scholarship,” “Practical Application of Scholarship,” and the “Fostering of Good Citizens.” It is a private university with 10 faculties, including undergraduate departments, graduate schools, and professional graduate schools. As Waseda University approaches its 150th anniversary in 2032, it is returning to its founding principles and striving to further strengthen its three pillars: research, education, and contribution. Furthermore, under the philosophy, "Do not think only of your own interest, your family's interest, or the interests of your country alone, but be ambitious to contribute to humankind throughout the world," the University aims to evolve into a “university that contributes to humankind throughout the world” by 2050. Find out more: https://www.waseda.jp/top/en/About FujitsuFujitsu’s purpose is to make the world more sustainable by building trust in society through innovation. As the digital transformation partner of choice for customers around the globe, our 113,000 employees work to resolve some of the greatest challenges facing humanity. Our range of services and solutions draw on five key technologies: AI, Computing, Networks, Data & Security, and Converging Technologies, which we bring together to deliver sustainability transformation. Fujitsu Limited (TSE:6702) reported consolidated revenues of 3.6 trillion yen (US$23 billion) for the fiscal year ended March 31, 2025 and remains the top digital services company in Japan by market share. Find out more: global.fujitsuPress ContactsShibaura Institute of TechnologyAdmissions and Public Relations Department, Planning and Public Relations Division, TateiwaTEL: 03-5859-7070 FAX: 03-5859-7071E-mail: koho@ow.shibaura-it.ac.jpWaseda UniversityOffice of Information and Public RelationsMatsukiTEL: 03-3202-5454E-mail: koho@list.waseda.jpFujitsu LimitedPublic and Investor Relations DivisionInquiries Copyright 2025 JCN Newswire via SeaPRwire.com.

Tokyo, Japan, August 22, 2025 - (JCN Newswire via SeaPRwire.com) — NEC Corporation (NEC; TSE: 6701) today announced the development of an optical fiber sensing technology to monitor road conditions and accurately predict sudden traffic congestion in real time. By collecting data from existing optical fiber communications cables and analyzing real-time traffic flow data using a proprietary AI model, NEC has reduced prediction errors by 80% compared to conventional methods.This technology enables effective traffic control, including the arrangement of detour routes, thereby contributing to the resolution of societal challenges such as logistics issues and CO2 emissions.Technology OverviewTraffic congestion is a significant social issue, threatening safety and causing substantial economic losses. In particular, congestion on expressways—the backbone of many logistics networks—has a significant economic impact. Addressing this issue requires real-time understanding of road conditions for both immediate congestion mitigation and proactive avoidance, as well as highly accurate congestion prediction based on up-to-date data.Current monitoring approaches primarily rely on point-based instruments, including cameras and loop detectors, as well as probe vehicle data (*1). However, both have limitations: the former is costly to install and maintain over entire road networks, and the latter only provides data when equipped vehicles pass by specific receiver points, limiting real-time and continuous coverage. Moreover, existing congestion prediction models heavily rely on long-term historical data, making it difficult to capture the emergence and propagation of sudden, unexpected congestion patterns.To address these challenges, NEC has developed a technology that utilizes optical fiber cables—originally installed for communications purposes alongside roads—as extensive, distributed sensors for collecting real-time, continuous traffic flow data across entire routes. NEC’s unique AI-powered model then provides real-time, high-precision predictions regarding the development and clearance of sudden congestion.Technical FeaturesNEC has developed a data assimilation algorithm that combines advanced model parameter optimization and data adapting techniques, enabling accurate simulations of real-time traffic flow using comprehensive data collected along the entirety of roadways.Model Parameter Optimization AlgorithmNEC has created an algorithm to optimize theoretical model parameters—such as driver behaviors (e.g. inter-vehicle distance adjustment)—so that simulations faithfully reproduce observed traffic flow data for entire road segments.Data Adaptation AlgorithmAn advanced algorithm converts diverse traffic flow data, including "average speed" and individual vehicle "position/speed," into formats compatible with simulation inputs. This makes it possible to set the initial conditions for simulations based on comprehensive traffic flow data obtained on entire routes, significantly enhancing the reliability of simulation outputs.Through these innovations, NEC has confirmed—using real-world data—that travel time prediction errors (a key indicator for congestion forecasting) can be reduced by approximately 80% compared to the existing method that relies on cross-sectional data from point sensors such as cameras. NEC is further advancing the realization of a dynamic road digital twin that enables real-time, network-wide traffic monitoring, the prediction of congestion evolution, and optimization of responsive measures. Real-world trials are currently underway in close collaboration with road authorities, with the goal of practical deployment by fiscal 2026.This technology was developed using data provided by Central Nippon Expressway Company Limited (NEXCO CENTRAL) and was presented at the Transportation Research Board 104th Annual Meeting (*2). NEC will also present a related paper at the 31st ITS World Congress in Atlanta, Georgia, USA, focused on enhancing the accuracy of traffic flow monitoring on expressways (*3).(*1)A system that automatically collects driving data—such as the location and speed of vehicles equipped with onboard units—using roadside sensors installed at intervals ranging from several to tens of kilometers.(*2)Presentation ID TRBAM-25-01491, "A Novel Approach to Real-Time Short-Term Traffic Prediction based on Distributed Fiber-Optic Sensing and Data Assimilation with a Stochastic Cell-Automata Model," presented at the Artificial Intelligence–Based Solutions for Traffic Modeling and Control.(*3)Session ID: PS31 Transportation Systems: Traffic Management and Operations, Next-Generation Traffic Management Approaches Title: TSE (Traffic State Estimation) in Congestion to Extend the Applicability of DFOSAbout NEC CorporationThe NEC Group leverages technology to create social value and promote a more sustainable world where everyone has the chance to reach their full potential. NEC Corporation was established in 1899. Today, the NEC Group’s approximately 110,000 employees utilize world-leading AI, security, and communications technologies to solve the most pressing needs of customers and society. For more information, please visit https://www.nec.com, and follow us on Instagram, Facebook, and LinkedIn. Copyright 2025 JCN Newswire via SeaPRwire.com.

HONG KONG, Aug 22, 2025 - (ACN Newswire via SeaPRwire.com) - On August 22, CaoCao Inc. (‘CaoCao’ or ‘Company’, stock code: 2643.HK,) was selected to be added to the Hang Seng Composite Index as a constituent stock, with the change taking effect on September 8, 2025. The adjustment, which follows the semi-annual review results as of June 30, 2025, reflects capital market’s high recognition of CaoCao Inc.’s industry standing and growth potential. It is widely anticipated that the company will become eligible for inclusion in the Hong Kong Stock Connect on the same date, thereby broadening its investor base and attracting additional capital from Mainland China.As a key screening criterion for inclusion in the Hong Kong Stock Connect, constituents of the Hang Seng Composite Index must meet stringent requirements in market capitalization, liquidity, and representativeness. Since its listing on the Hong Kong Stock Exchange on June 25 in 2025, CaoCao Inc. has seen a continuous rise in its share price. By the end of the review period, its market capitalization far exceeded the inclusion threshold for the Hang Seng Composite Index (institution estimates place the threshold for this adjustment at approximately HKD 7.33 billion), while its trading activity also met the requirements. The company’s unique “purpose-built vehicles + asset-light expansion” model and its early strategic deployment in the Robotaxi sector have injected new economic dynamism into the index.CaoCao Inc. is a shared mobility platform incubated by Geely. The company has become China’s second-largest ride hailing platform by 2024 Gross Transaction Value (GTV) and the largest listed mobility technology company on the Hong Kong Stock Exchange. Leveraging Geely’s ecosystem, CaoCao Inc. has introduced all-electric vehicle models specifically designed for shared mobility scenarios. The Total Cost of Ownership (TCO) of these purpose-built vehicles is 36.4% lower than that of typical electric vehicles. The company has deployed 34,000 purpose-built vehicles across 31 major cities, representing the largest fleet of its kind.In 2024, CaoCao Inc. achieved an annual GTV of approximately RMB 17 billion, with its service network covering 136 cities nationwide. By selling purpose-built vehicles to local mobility capacity partners, it successfully expanded into 85 new cities and incentivized these partners to provide services through its platform. The company’s growing economies of scale contributed to an increase in its gross profit margin to 8.1% in 2024, reflecting continued improvement in profitability.In February 2025, CaoCao Inc. launched its autonomous driving platform, “CaoCao Zhixing,” initiating pilot operations in Suzhou and Hangzhou. In collaboration with Geely, the company is developing L4-level Robotaxi purpose-built vehicles, which are expected to have a significantly lower TCO than comparable products in the industry. According to forecasts by Frost & Sullivan, China’s Robotaxi market is projected to grow to RMB 1,600 billion by 2035. CaoCao Inc. has established China’s first self-developed closed-loop ecosystem for Robotaxi, integrating purpose-built vehicles, autonomous driving technology, and a mobility platform. With this full industrial chain advantage, its Robotaxi business is poised to become a new growth engine for the company.A number of leading financial institutions—including J.P. Morgan, Huatai Securities, and Shenwan Hongyuan Securities—previously projected that CaoCao Inc. is expected to be included in the Hong Kong Stock Connect on September 8, enabling mainland investors to directly invest in the company through the Shanghai-Shenzhen-Hong Kong Stock Connect mechanism. More recently, Zheshang Securities also initiated coverage with a “Buy” rating and set a target price of HK$103.17. Analysts believe that the anticipated inclusion into the Stock Connect, coupled with accelerating commercialization of Robotaxi services, is likely to unlock further medium- to long-term valuation upside. In addition, passive funds tracking the index adjustment are expected to carry out concentrated buying during the tail end of the trading session on September 5, which may contribute to noticeable volume growth and upward momentum in CaoCao Inc.’s share price. Copyright 2025 JCN Newswire via SeaPRwire.com.

HONG KONG, Aug 22, 2025 - (ACN Newswire via SeaPRwire.com) - CITIC Resources Holdings Limited (hereinafter referred to as the CITIC Resources or the Company, or the Group when its subsidiaries are included; Stock Code: 1205.HK) has been steadfastly executing its dual driver development strategy of “investment + trading” for the six months ended 30 June 2025 (the "Period"). Despite the continued decline in commodity prices and severe operating pressure in the energy industry, the Group has continued to demonstrate strong operational resilience. In the future, the Group will continue to deepen its dual driver development model, fully expand its oil and gas trading business, and focus on investing in the aluminum product industry chain to enhance corporate value across all dimensions.The Group actively responded to the adverse impact of commodity price fluctuations and deployed a number of corresponding measures. For the oil and gas business, various measures were carried out in an in-depth manner to increase reserves and production, grow revenue and reduce expenditure, thereby exploring the potential of existing investments, intensifying quality and efficiency improvement, and enhancing enterprise value. For non-oil-and-gas businesses, the Group increased the frequency and depth of participation in project management in line with the principle of “control is essential for subsidiaries, exercising of rights is essential for participating interests”, and urged operators to reduce costs and improve efficiency while providing operational recommendations.During the Period, owing to the steady expansion of the scale of the oil and gas trading business, the Group achieved revenue of approximately HK$9.38 billion, representing a substantial year-on-year increase of approximately 137.9%. Impacted by factors such as the continuous decrease in crude oil and coal prices and the high price of raw material alumina, the profit attributable to ordinary shareholders of the Company amounted to approximatelyHK$0.15 billion (1H2024: approximately HK$0.35 billion). Nonetheless, half of the Group's segments and investments recorded profits for the Period, and the Group continued to maintain a strong financial position with cash and deposits of approximately HK$4.42 billion as at 30 June, 2025 (December 31, 2024: HK$2.03 billion). As at 30 June 2025, the Group’s total assets amounted to approximately HK$15.93 billion and net assets attributable to ordinary shareholders of the Company were approximately HK$7.66 billion, with the debt to asset ratio of approximately 51.0% and return on equity (annualised) of approximately 3.9%. The Group has healthy assets and strong liquidity.Mr. Hao Weibao, Executive Director, Chairman and Chief Executive Officer of CITIC Resources, said, “Oil and gas will continue to occupy a key position in the energy mix. Meanwhile, the ongoing industrialisation and urbanisation in developing countries and emerging economies will continue to support the demand for aluminium, and the rapid development of new energy, electric vehicles and high-end equipment manufacturing will further boost the growth of aluminium consumption. The Group will continue its strategy of ‘seeking progress amidst stability’ and unswervingly deepen its dual driver development strategy of ‘investment + trading’. While consolidating the foundation of high-quality development of its existing business, the Group will steadily expand its oil-and-gas trading footprint, focusing on midstream and upstream mining investments with aluminium products as the core, as well as the investments in high-quality oil and gas projects. The Group will continuously strengthen its core competitiveness by comprehensively enhancing the operational efficiency of existing projects, optimising the management of the Company’s shares value and strengthening the risks management and control. The Group will continue to enhance its corporate value and create sustainable and stable investment returns for its shareholders through prudent business strategies and innovative development plans.”For details of the 2025 interim results of CITIC Resources, please refer to the Group's interim results announcement on the Hong Kong Stock Exchange and the Group’s website.About CITIC Resources Holdings Limited (Stock code: 1205.HK)CITIC Resources Holdings Limited has been listed on the Hong Kong Stock Exchange since 1997. Principal activities of CITIC Resources include the exploration, development and production of oil and coal, investments in bauxite mining, alumina refinery, aluminium smelting and oil and gas trading. CITIC Limited is the largest shareholder with about 59.5% interest in CITIC Resources. Copyright 2025 JCN Newswire via SeaPRwire.com.

HONG KONG, Aug 22, 2025 - (ACN Newswire via SeaPRwire.com) - China International Development Corporation Limited (“the Company”; SEHK: 0264) is pleased to announce that it has entered into a definitive agreement to acquire a 20% equity interest in NVTHK Ltd. (“NVT”), a Hong Kong-based financial technology innovator and first mover in the Real-World Asset (“RWA”) tokenization market. This strategic acquisition positions the Company at the forefront of a sector expected to reshape global capital markets and deliver exponential growth in the years ahead.NVT — First Mover in a Transformative MarketNVT is the pioneering RWA tokenization infrastructure provider in Hong Kong, uniquely enabling primary issuance from top-tier financial institutions and on chain secondary trading of regulated tokenized assets through its robust OTC market place — the first full-scale ecosystem of its kind in the market.Its fully integrated, closed-loop ecosystem connects asset issuers, investors, and liquidity providers, unlocking unprecedented efficiency and liquidity for the financial industry.NVT’s prestigious institutional-grade clientele spans top financial institutions, asset managers, and Web3 innovators, including Cinda Asset Management, GF Securities, Golden Continent Asset Management, Animoca Brands, and HashKey Group. Its platform currently supports tokenized issuances across multiple financial product categories — including money market funds, structured products, bonds, private equity funds—demonstrating broad applicability and market acceptance.This Acquisition is Breakthrough for China International DevelopmentAccording to a BCG report dated April 2025, the global RWA tokenization market is forecast to grow from US$0.6 trillion in 2025 to US$18.9 trillion by 2033 in the midpoint scenario — a 53% compound annual growth rate. The sector’s rapid expansion reflects rising institutional and retail demand for high yield, transparent, and directly accessible asset classes.By acquiring a 20% stake in NVT, the Company gains:- A turnkey, proprietary institutional-grade tokenization platform — success-proven and fully regulated;- Access to the first RWA ecosystem in Hong Kong with secondary trading via an on chain OTC marketplace;- An established global distribution network with instant connectivity to liquidity providers, asset issuers, and investors globally;- Credibility and market access through alignment with a trusted RWA ecosystem serving blue chip clients.This acquisition accelerates the Company’s entry into the high growth RWA market at scale, without the delays, risks, and capital expenditure associated with building a platform from scratch. The Acquisition is also consistent with the Company’s commitments to exploring innovations and new business opportunities to diversify income streams.Strategic Collaboration AreasFollowing the investment, the Company and NVT will collaborate in two strategic areas:RWA Tokenization in Leather Production & Supply ChainLeveraging NVT’s platform, the Company will be a global first mover in tokenizing tangible and intangible assets within the leather industry—such as cash flows, receivables, inventory, and IP. This will unlock working capital, open new investment channels, automate settlements, and expand liquidity access worldwide.Expansion into New RWA VerticalsTogether, the Company and NVT will develop and scale RWA tokenization solutions for other industries, deploying the Company’s sector expertise and NVT’s proven infrastructure to capture untapped opportunities in multiple asset classes.Zhao Jingfei, CEO of China International Development Corporation Limited said:“This investment in NVT represents a breakthrough for our Company. NVT’s unmatched first mover position, its proven track record with prestigious institutional clients, and its unique on chain secondary trading capabilities place it in a category of its own. We are now positioned to participate meaningfully in a trillion dollar growth opportunity while modernizing our core business and delivering long term shareholder value.”Jay Zhao, the founder and CEO of NVT added:“Our mission is to leverage blockchain technology to redefine capital markets, with a particular focus on Hong Kong — the financial hub of Asia. By partnering with China Development, we are opening access to high quality assets from real-world industries and seamlessly integrating them into the capital market. This partnership not only enhances the strength of our platform but also creates significant opportunities for value creation across our ecosystem of partners, with a clear focus on maximizing long term shareholder returns. What we are building is just the beginning — the potential for new business models, innovative asset classes, and scalable growth ahead is truly limitless.”About NVTNVTHK Limited. (“NVT”) is a Hong Kong based fintech innovator specializing in real world asset (RWA) tokenization infrastructure, virtual asset brokerage systems, and stablecoin technology solutions. NVT is the first in Hong Kong to enable regulated tokenized assets to be traded on chain through its OTC marketplace, offering enterprise grade technology for issuers, investors, and intermediaries.About China International Development Corporation LimitedChina International Development Corporation Limited (“CIDC”) was incorporated in the Cayman Islands and is listed on the Main Board of The Stock Exchange of Hong Kong under stock code 0264. As an established investment holding company, CIDC has built a strong foundation in the manufacturing and distribution of high-quality leather products. CIDC has proactively embarked on a strategy of innovation and transformation, seeking opportunities beyond its traditional core business. The Company is always committed to seeking opportunities for new business and value creation, as well as for timely expansion of the Company’s scope of operation and investments.For press enquiries:NVTHK LimitedOlivia Leung Tel: 2522 3869 Email: Olivia.leung@newvisiongp.comWebsite: www.nvt.cim.hk Copyright 2025 JCN Newswire via SeaPRwire.com.

Yokohama, Japan, August 21, 2025 - (JCN Newswire via SeaPRwire.com) — In an effort to develop agriculture and boost rural development, NEC Corporation (NEC; TSE: 6701), a leader in the integration of IT and network technologies, together with the International Fund for Agricultural Development (IFAD), will tailor high-end digital technologies – remote sensing and secure digital platforms – to suit the unique needs of vulnerable small-scale producers in Africa.A letter of intent was signed today to forge the new partnership on the margins of the Ninth Tokyo International Conference on African Development (TICAD9). This new partnership aims to enhance farm productivity, build resilience to weather and economic shocks, and support farmers in adapting to climate change. The initiative will also promote new economic opportunities through the implementation of technology solutions such as CropScope, NEC’s digital agricultural platform that will enhance the capabilities of decision-makers in farm management across IFAD’s investment portfolio.Alvaro Lario, President of IFAD (left) and Shigehiro Tanaka, Corporate Senior Executive Vice President of NEC (right) (C) IFADSmall-scale producers are central to global food systems, accounting for over 80% of farms worldwide, and playing a crucial role in ensuring food security and sustaining rural livelihoods. Yet, millions of small-scale producers lack access to real-time agricultural advisory services, climate-resilient technologies, financial services, and structured markets."We are excited to partner with NEC to implement solutions that integrate digital technologies into agricultural value chains. Scaling up digital public infrastructure with scalable digital services for rural development is key to boosting rural economies, creating new opportunities and raising incomes for millions of vulnerable producers," said Alvaro Lario, President of IFAD. "Addressing these persistent challenges is critical for achieving rural transformation, a core objective of IFAD," he added."We are pleased to deepen our collaboration with IFAD toward the development of the African region through NEC’s strengths in digital agricultural solutions. At TICAD9, the active adoption of digital technologies by Japanese companies is being discussed as a key solution to the challenges faced by African countries. We believe that the initiatives under this Letter of Intent directly reflect TICAD9’s objectives, and we look forward to further strengthening the partnership between IFAD and NEC through this opportunity," said Shigehiro Tanaka, Corporate Senior Executive Vice President of NEC.The partnership will pilot two NEC innovations:CropScope is a digital agriculture platform that leverages remote sensing, data analytics, and timely insights to support data-driven precision farming and enhance the capabilities of decision-makers in farm management across the value chain.e-Voucher is an electronic voucher system that improves targeting and efficiency in the access and delivery of agricultural inputs and subsidies to smallholders. The collaboration seeks to:Accelerate digital transformation across IFAD’s portfolio through the deployment of NEC’s advanced technologies, directly contributing to its strategic priorities on innovation and digital inclusion.Pilot cost-effective, cutting-edge solutions through NEC’s contributions, with potential for replication across other IFAD-funded projects.Enhance targeting, monitoring, and adaptive management in IFAD programmes through data-driven insights.The partnership aligns with IFAD’s Information and Communication Technologies for Development (ICT4D) Strategy (2020–2030) and broader efforts to increase private sector engagement and scale up digital services that empower rural communities.About IFADIFAD is an international financial institution and a United Nations specialized agency. Based in Rome – the United Nations food and agriculture hub – IFAD invests in rural people, empowering them to reduce poverty, increase food security, improve nutrition and strengthen resilience. Since 1978, we have provided more than US$25 billion in grants and low-interest loans to fund projects in developing countries A wide range of photographs and broadcast-quality video content of IFAD’s work in rural communities are available for download from our Image Bank.About NEC CorporationNEC Corporation has established itself as a leader in the integration of IT and network technologies while promoting the brand statement of “Orchestrating a brighter world.” NEC enables businesses and communities to adapt to rapid changes taking place in both society and the market as it provides for the social values of safety, security, fairness and efficiency to promote a more sustainable world where everyone has the chance to reach their full potential. For more information, visit NEC at https://www.nec.com. Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, August 21, 2025 - (JCN Newswire via SeaPRwire.com) - Sharp Corporation and Sharp Energy Solutions Corporation (*1) (hereinafter referred to as “Sharp”) have signed a memorandum of understanding (MOU) regarding the donation of solar modules to support electrification-deficient areas in the Republic of Kenya (hereinafter “Kenya”). This MOU is signed with Mitsui O.S.K. Lines, Ltd. (Headquarters: Minato ward, Tokyo, hereinafter referred to as “MOL”), and Association for Aid and Relief, Japan (*2) (hereinafter referred to as “AAR Japan”), in conjunction with 9th Tokyo International Conference on African Development (*3) (TICAD 9).(From left) Tatsuro Watanabe, Responsible for Europe and Africa Region, Chairman & Managing Director of MOL (Europe Africa) Ltd;Yasufumi Sugahara, Executive Managing Officer & Co-Chief Operating Officer, Sharp Corporation;Hirozumi Gokaku, President & Representative Director, Sharp Energy Solutions Corporation;Yoshiteru Horie, President, AAR Japan.The MOU stipulates that the solar modules donated by Sharp will be transported to Kenya by Mitsui O.S.K. Lines, and AAR Japan will support the installation on-site. The modules are for use in lighting, powering projectors and PC for elementary schools. The aim of this project is to contribute to the improvement of education in the region.Sharp has been promoting ESG-based management, and this MOU aligns with its corporate philosophy "to contribute to the benefits and welfare of people throughout the world." Sharp will continue to address societal challenges and fulfill its commitment to social contribution by utilizing its unique products solutions and technologies.*1 Sharp Energy Solutions Corporation is a subsidiary of Sharp Corporation responsible for energy solutions. Headquarters: Yao City, Osaka Prefecture. President and Representative Director: Hirozumi Gokaku.*2 AAR Japan is an organization that operates internationally, focusing on refugee assistance. Chairperson: Yukie Osa.*3 The TICAD 9 will be held from August 20 to August 22, 2025, at Pacifico Yokohama (Yokohama City, Kanagawa Prefecture). It is organized by the Japanese government in collaboration with the United Nations, the United Nations Development Programme (UNDP), the World Bank, and the African Union Commission (AUC).Sharp Sustainability global website: https://global.sharp/corporate/eco/ Copyright 2025 JCN Newswire via SeaPRwire.com.

HIROSHIMA, Japan, August 21, 2025 - (JCN Newswire via SeaPRwire.com) - Toyota Motor Corporation (Toyota) and Mazda Motor Corporation (Mazda) have started field tests of Toyota's Sweep Energy Storage System* at Mazda's Hiroshima Plant in Hiroshima Prefecture, Japan.For the tests, the power system at Mazda's headquarters campus-the only power generation system operated by an automaker in Japan-and Toyota's system that utilizes batteries from electrified vehicles will be connected through their respective energy management systems. This will enable the verification of stable, high-quality, and efficient charging and discharging. In the future, the storage system will be used to regulate power supply and demand from renewable energy, which fluctuates depending on weather and time of day, contributing to carbon neutrality.The tests are aimed to contribute to building a battery ecosystem, which is part of the seven mobility industry issues that the Japan Automobile Manufacturers Association is addressing across the industry. In support of stable procurement of critical resources and building a resilient supply chain, the battery ecosystem is aimed to sustainably reuse batteries in Japan, including electrified vehicle batteries.Going forward, both companies will continue to take on challenges across the industry, focusing on a multi pathway approach to achieve carbon neutrality and strengthen industry competitiveness.*The system rapidly switches each battery's power flow on and off, even when new batteries are connected to degraded or different capacity batteries.Aim for Sweep Energy Storage System Field Tests"Achieving zero, and adding new value beyond it"As part of efforts to pass our beautiful "Home Planet" to the next generation, Toyota has identified and is helping to solve issues faced by individuals and overall society, which Toyota calls "Achieving Zero," hoping to help reduce the negative impacts caused by these issues to people and the environment to zero. Additionally, Toyota is also looking "Beyond Zero" to create and provide greater value by continuing to diligently seek ways to improve lives and society for the future.About Beyond Zero https://global.toyota/en/mobility/beyond-zero/Toyota Motor Corporation works to develop and manufacture innovative, safe and high-quality products and services that create happiness by providing mobility for all. We believe that true achievement comes from supporting our customers, partners, employees, and the communities in which we operate. Since our founding over 80 years ago in 1937, we have applied our Guiding Principles in pursuit of a safer, greener and more inclusive society. Today, as we transform into a mobility company developing connected, automated, shared and electrified technologies, we also remain true to our Guiding Principles and many of the United Nations' Sustainable Development Goals to help realize an ever-better world, where everyone is free to move.SDGs Initiativeshttps://global.toyota/en/sustainability/sdgs/ Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, August 21, 2025 - (JCN Newswire via SeaPRwire.com) - Sharp Corporation and Sharp Energy Solutions Corporation (*1) (hereinafter referred to as “Sharp”) have signed a memorandum of understanding (MOU) regarding the cooperation through renewable energy to advance improved access to basic services in displacement-affected areas in the Republic of Kenya (hereinafter “Kenya”). This MOU is signed with Mitsui O.S.K. Lines, Ltd. (Headquarters: Minato ward, Tokyo, hereinafter referred to as “MOL”), and the International Organization for Migration (*2) (hereinafter referred to as “IOM”), in conjunction with the 9th Tokyo International Conference on African Development (*3) (TICAD 9).(From left) Tatsuro Watanabe, Responsible for Europe and Africa Region, Chairman & Managing Director of MOL (Europe Africa) Ltd;Yasufumi Sugahara, Executive Managing Officer & Co-Chief Operating Officer, Sharp Corporation;Hirozumi Gokaku, President & Representative Director, Sharp Energy Solutions Corporation;Ritsu Nacken, Chief of Mission, IOM Japan.The MOU also stipulates that the Parties will explore innovative solutions and technologies to strengthen climate resilience of vulnerable communities in Kenya.Sharp has been promoting ESG-based management, and this MOU aligns with its corporate philosophy "to contribute to the benefits and welfare of people throughout the world." Sharp will continue to address societal challenges and fulfill its commitment to social contribution by utilizing its unique products solutions and technologies.*1 Sharp Energy Solutions Corporation is a subsidiary of Sharp Corporation responsible for energy solutions. Headquarters: Yao City, Osaka Prefecture. President and Representative Director: Hirozumi Gokaku.*2 The International Organization for Migration (IOM) is a UN agency that addresses global migration issues. IOM Japan Chief of Mission : Ritsu Nacken.*3 The TICAD 9 will be held from August 20 to August 22, 2025, at Pacifico Yokohama (Yokohama City, Kanagawa Prefecture). It is organized by the Japanese government in collaboration with the United Nations, the United Nations Development Programme (UNDP), the World Bank, and the African Union Commission (AUC).Sharp Sustainability global website: https://global.sharp/corporate/eco/ Copyright 2025 JCN Newswire via SeaPRwire.com.

Tokyo, Japan, August 21, 2025 - (JCN Newswire via SeaPRwire.com) — NEC Corporation (NEC; TSE: 6701) today announced the signing of a Memorandum of Cooperation (MOC) in the vocational training sector in Senegal with the Senegalese government, the Senegal-Japan Vocational Training Center (CFPT-SJ), the Japan International Cooperation Agency (JICA), Toyota Tsusho Corporation (Toyota Tsusho), Daikin Industries, Ltd. (Daikin), Toda Construction Co., Ltd. (Toda Construction), and Yamaha Motor Co., Ltd. (Yamaha).Based on this memorandum, each company will provide training programs to CFPT-SJ to support the development of industrial human resources in Senegal. NEC will contribute to the development of industrial human resources by promoting the understanding and reach of digital technologies related to improving crop productivity, improving farming practices, and contributing to universal health coverage, which are some of the major goals of the Republic of Senegal and align with the Government of Japan’s Country Assistance Policy.Signing ceremony for the Memorandum of Cooperation at the 9th Tokyo International Conference on African Development (TICAD 9)Established in 1984 with grant aid from JICA, CFPT-SJ has become a core educational institution in the field of vocational training, not only in Senegal but also in the West African region. In recent years, demand has been steadily growing for more sophisticated and diverse industrial human resources in Senegal, and CFPT-SJ is committed to developing human resources that meet these needs.To date, Toyota Tsusho, Daikin, Toda Construction, Yamaha, and NEC have contributed to industrial development in Senegal and the West African region through their respective businesses. However, the cultivation and acquisition of highly skilled industrial human resources necessary for business promotion remains a challenge. In response to this, JICA, Japan-based companies, and the CFPT-SJ have concluded this MOC to strengthen and develop cooperation in the cultivation of industrial human resources in Senegal.Specifically, regarding the implementation of training programs by the Japan-based companies belonging to the CFPT-SJ, the following points were agreed upon: (1) the Senegalese government will cooperate with CFPT-SJ, (2) CFPT-SJ will cooperate with each participating organization, (3) JICA will coordinate between Japan and Senegal, and (4) Toyota Tsusho, Daikin, Toda Construction, Yamaha, and NEC will formulate and implement training programs in their respective areas of expertise.Through this MOC, NEC aims to contribute to greater understanding of digital technology and the development of industrial human resources in Senegal, while strengthening its collaboration with JICA to expand the development of solutions in the agriculture and health sectors in the African region.About NEC CorporationNEC Corporation has established itself as a leader in the integration of IT and network technologies while promoting the brand statement of “Orchestrating a brighter world.” NEC enables businesses and communities to adapt to rapid changes taking place in both society and the market as it provides for the social values of safety, security, fairness and efficiency to promote a more sustainable world where everyone has the chance to reach their full potential. For more information, visit NEC at https://www.nec.com. Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, Aug 22, 2025 - (JCN Newswire via SeaPRwire.com) - TANAKA MIRAI Lab., part of TANAKA PRECIOUS METAL GROUP Co., Ltd. (head office: Chuo-ku, Tokyo; Group CEO: Koichiro Tanaka), has developed an experimental unit for space molecular crystallization using Au nanostructure formation technology (patent pending). On April 21, 2025 (local time), the experimental unit was installed in the SpaceX CRS-32, an unmanned commercial resupply spacecraft to the International Space Station (ISS) launched from the Kennedy Space Center in the U.S.Protein crystals formed within the experimental unit installed in the space station (magnified using a polarizing microscope)After installation in the ISS's Columbus science laboratory and one month of observation and experimentation, it safely returned to Earth, where it was confirmed that the experiments involving protein crystallization in space were successful.Significance of the ExperimentProtein crystallization experiments conducted in space are valuable for detailed structural analysis of protein molecules, as they can be carried out in a microgravity environment, eliminating the effects of gravity. Such experiments are expected to make significant contributions to understanding biological functions and advancing drug discovery. However, the success rate of producing crystals remains low, and the high costs along with the limited number of experiments that can be performed continue to pose challenges for space-based research. The experimental unit for space molecular crystallization, developed by TANAKA MIRAI Lab. and utilizing Au nanostructure formation technology, is expected to enable more cost-effective space experiments with superior outcomes. By leveraging protein crystallization technology based on the plasmon resonance (*1) of gold (Au), it can significantly improve the crystal generation rate. This advancement is anticipated to contribute to the elucidation of biological functions and to research in drug discovery.Superiority of “Experimental Unit for Space Molecular Crystallization Using Au Nanostructure Formation Technology”Protein molecules are easily absorbed onto the surface of Au nanoparticles, and plasmon resonance occurs between Au nanoparticles at wavelengths in the visible light range, promoting protein crystallization.TANAKA MIRAI Lab. has discovered that the condensation of light energy between Au nanoparticles further promotes the generation of protein crystal nuclei. In addition, in the microgravity environment of space, crystals of higher quality and larger size than those on the ground are expected to be generated because they are not affected by convection and sedimentation due to gravity.In combination with Au nanostructure formation technology, TANAKA MIRAI Lab. has developed a capillary (cylindrical glass device) (Figure 1) with high crystal generation capabilities (patent pending) for use in the counter-diffusion(*2) method.On the inner wall of the capillary with an inner diameter of 0.5 mm and a length of 5 cm, nano-level particles of Au (average diameter: 20 nm) are aligned at nano-level intervals (average distance between surfaces: 40 nm) that facilitate the generation of plasmon resonance near the surface of Au particles.In addition to conducting experiments in space, which is unaffected by gravity, the use of this unit is expected to dramatically improve the rate of obtaining protein crystals, which had been considered challenging. As a result, it is believed that this unit will contribute to the elucidation of biological functions and the development of drug discovery research.Figure 1: a) Photo of capillary b) Schematic diagram of capillary c) Electron microscope image of inner wallOverview of the ExperimentKirara, a space experiment service supplied by Japan Manned Space Systems Corporation (https://www.jamss.co.jp/en/space_utilization/kirara/), a space experiment consulting company, was used to install the experimental unit for space molecular crystallization using Au nanostructure formation technology in the SpaceX CRS-32 unmanned commercial resupply spacecraft.Specifically, capillaries were filled with protein solution and sealed in a tube (bag) which was stored within the Kirara device (a thermostatic chamber). This unit was then placed in the rocket and launched into space.Timeline of experiments involving protein crystallization in space* All times are U.S. local timesApril 7: Specimens sent from Japan to the U.S.April 13: Specimens arrive in Kennedy Space Center in Florida (U.S.)April 19: Specimens are loaded into Kirara device and placed in rocketApril 21: Kirara device is launched into space on a Space-X Falcon 9 rocket (CRS-32)April 22: Kirara device arrives at International Space Station (the ISS)April 23: Kirara device is installed in the ISS Columbus science laboratoryMay 21: Kirara device is removed from the ISS Columbus science laboratoryMay 25: CRS-32 with Kirara device returns to EarthResults of the ExperimentThe experimental unit for space molecular crystallization using Au nanostructure formation technology was used to successfully crystallize proteins in space (Figure 2).Figure 2: Top) Protein crystals formed in capillaries containing crystallization solution with NaCl concentration of 750 mMBottom) Magnified view of protein crystals taken using polarizing microscopeThe graph below (Figure 3) shows the final results of the protein crystallization experiment performed on the ISS(*3). The horizontal axis represents the concentration of the NaCl in the crystallization solution (mM). The vertical axis represents the average number of crystals that formed in the capillary (crystals per capillary).The blue bars (Au(-)) show the results for capillaries without Au nanostructures, while the red bars (Au(+)) show the results for capillaries with Au nanostructures.As the graph shows, the number of crystals that formed was higher for capillaries with Au nanostructures (the red bars on the graph).Experimental conditions● Capillary conditions: Capillaries with an inner diameter of 0.5 mm were used, and a structure of nano-level particles of Au with a diameter of 20 nm was formed on the inner walls of the capillaries (in the same way as for experiments performed on Earth in advance).● Solution conditions: Lysozyme refined for the space experiment was used as a solvent for protein (25 mg/L). For the crystallization solution, three NaCl concentrations were prepared: 650 mM, 700 mM, and 750 mM. These solutions included an acetic acid buffer (pH 4.5) with a concentration of 50 mM and PEG (4K) 20%.● Crystallization experiment: The counter-diffusion method was used, and the units were kept stationary at a temperature of 20°C in a weightless environment for 34 days, during which the crystallization process was observed.Comments from Researchers Responsible for the ExperimentTakayuki IshibashiChief Researcher, TANAKA MIRAI Lab.Ever since TANAKA MIRAI Lab. was first launched, we've envisioned precious metals as being used in extreme environments. Many projects never get beyond their planning phases, so I'm ecstatic that our first success was with an experiment in space, and that we've been able to exhibit the actual articles used in the experiment in our concept room here within the company. Seeing the proteins that crystallized in space here on Earth, with my own eyes, I felt again the potential for future crystal applications as we work toward the year 2085. We were able to achieve this success thanks to the combined efforts of many people, and I'd like to express my gratitude again to all those involved, both inside and outside the company.Masahiro ItoChief Researcher, TANAKA MIRAI Lab.This space project was a tremendously meaningful one for us, as it represented a great step forward. As a company that deals with precious metals, there have long been expectations for our participation in the space industry, but this was our first time really taking on a challenge in this sector. The project started out of a desire not just to think about things at the conceptual level but to test them out in space. I believe it reflects the spirit of TANAKA MIRAI Lab. — harnessing curiosity to drive our pursuit of creating rare and exceptional value for the future.Figure 4: Left) The experimental unit used in the ISS Right) Replica of the Kirara device(On exhibit in the DOCK2085 concept room at the head office)(*1) Plasmon resonance: A phenomenon in which light of a specific wavelength is absorbed on an Au surface that has been nanoparticulated. It is further enhanced when Au nanoparticles are close together at nano-level spacing.(*2) Counter-diffusion method: One of the protein crystallization methods, in which crystals are obtained by bidirectional diffusion of the protein solution inside the capillary and the crystallization solution outside. During this process, a concentration gradient is generated inside the capillary, which makes it possible to simultaneously search for a wide range of crystallization conditions. In addition, since the protein is not concentrated during crystallization, crystal growth proceeds gently.(*3) While more crystals were generated in the unit with the Au nanostructures, the experiments were performed under a limited number of experimental conditions, so this cannot be concluded to represent a significant difference. Furthermore, the overall number of crystals that were generated was low in comparison to prior experiments performed on Earth. This is believed to be due to a large number of days passing between when the capillaries were filled with solution and when the crystallization began.About TANAKA MIRAI Lab.TANAKA has been advancing a transformation of its overall business toward the year 2085, the 200th anniversary of its founding, with the aim of “creating a future that no one has ever seen before.” As part of this initiative, TANAKA launched TANAKA MIRAI Lab., an organization to lead the creation of new paradigms for a better future—from emergence to realization.TANAKA MIRAI Lab.’s mission is to envision an unseen future and realize various possibilities by conducting research derived from “kisho (precious and rare) value.”About TANAKASince its foundation in 1885, TANAKA has built a portfolio of products to support a diversified range of business uses focused on precious metals. TANAKA is a leader in Japan regarding the volume of precious metals it handles. Over many years, TANAKA has manufactured and sold precious metal products for industry and provided precious metals in such forms as jewelry and assets. As precious metals specialists, all Group companies in Japan and worldwide collaborate on manufacturing, sales, and technology development to offer a full range of products and services. With 5,591 employees, the group's consolidated net sales for the fiscal year ended December 2024 were 846.9 billion yen.TANAKA Industrial Precious Metal Materials Portalhttps://tanaka-preciousmetals.comPress inquiriesTANAKA PRECIOUS METAL GROUP Co., Ltd.https://tanaka-preciousmetals.com/en/inquiries-for-media/Press release: https://www.acnnewswire.com/docs/files/2025821.pdf Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, August 21, 2025 - (JCN Newswire via SeaPRwire.com) — NEC Corporation (NEC; TSE: 6701) has developed technology that utilizes AI to enable safe, efficient autonomous control of robot movement even in complex environments with many obstacles. NEC’s in-house demonstrations of this technology have confirmed that a robot's travel time can be reduced by up to 50% when compared to conventional methods (*).This new technology utilizes NEC's proprietary AI, which has been trained with the knowledge of multiple AIs, to generate optimal travel paths in real time. NEC aims to commercialize this technology by the end of fiscal 2026.In recent years, automation through the introduction of robots has been progressing in large logistics warehouses and factories due to a decrease in labor forces and the need to improve productivity. However, in existing small- and medium-sized logistics warehouses, where it is difficult to prepare a dedicated environment for robots, and in retail stores, where aisles are narrow and display shelves and products are obstacles, it is difficult to secure paths for robots to move, which has hindered their introduction.Furthermore, in robot control technology, there has been a trade-off between the time required to predict a path and the quality of the estimated path, and it takes time to estimate optimal routes. Therefore, robot control technology has not been practical in complex environments with many obstacles.Features of the robot control technology developed by NEC to address these issues include the following.Proprietary AI that generates optimal routes in real timeTraditionally, autonomous robot navigation in environments with numerous obstacles has relied on a combination of AI technologies and methods that generate paths based on predefined rules and procedures. However, there have been challenges in achieving optimal path generation that balances safety and efficiency. Additionally, while combining multiple AI systems can generate more appropriate paths, increasing the number of AI systems tends to prolong processing time and make real-time control more difficult. NEC has developed a proprietary AI that can learn the paths generated by multiple AI systems and generate multiple paths at once. This enables the generation of safe and efficient optimal paths even in environments with irregularly placed obstacles, thereby realizing real-time robot control.50% reduction in robot travel timeIn simulations on a 50-meter-long test course with randomly placed obstacles, robots using this technology confirmed that the time required to run through the course could be reduced by up to 50% compared to conventional methods. This makes it possible to roughly double the efficiency of robot movement, while ensuring safety and contributing to further improvements in work efficiency on site.(*) Reinforcement Learning-based Dynamic Window Approach (RL-based DWA)About NECThe NEC Group leverages technology to create social value and promote a more sustainable world where everyone has the chance to reach their full potential. NEC Corporation was established in 1899. Today, the NEC Group’s approximately 110,000 employees utilize world-leading AI, security, and communications technologies to solve the most pressing needs of customers and society.For more information, please visit https://www.nec.com, and follow us on Instagram, Facebook, and LinkedIn.About NEC CorporationNEC Corporation has established itself as a leader in the integration of IT and network technologies while promoting the brand statement of “Orchestrating a brighter world.” NEC enables businesses and communities to adapt to rapid changes taking place in both society and the market as it provides for the social values of safety, security, fairness and efficiency to promote a more sustainable world where everyone has the chance to reach their full potential. For more information, visit NEC at https://www.nec.com. Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, Japan, August 20, 2025 - (JCN Newswire via SeaPRwire.com) – Honda Motor Co., Ltd. (Honda) today announced the recent establishment of a new company in India, Honda Finance India Private Ltd., (“Honda Finance India”) that will offer customers retail sales financing services including loans and lease sales options for Honda products in India.In India, where further growth of the motorcycle and automobile markets is expected, the number of customers using loans to purchase motorcycles and cars is also expected to increase. Until now, retail sales financing services in the Indian market have mainly been provided by local financial institutions. However, in light of market trends, Honda will further strengthen its business in India by offering its own sales financing services through a local subsidiary in India.Honda Finance India Private Ltd. will apply for a Non-Banking Financial Company (NBFC) license to conduct financial services business in India. After obtaining the license, the company will begin offering retail sales financing services to help customers finance their purchase of motorcycles, automobiles and services provided by Honda.Financial services business has been one of the main business areas of Honda, and the company has established local subsidiaries specializing in retail sales financing services in Japan and various countries in key regions such as North America, and Europe. With the establishment of the new company, India became the ninth country where Honda has a local subsidiary to offer financial services. Honda will work to establish long-term relationships with customers by offering flexible financial services tailored to the specific needs of customers in each region. Moreover, in anticipation of the global expansion of software-defined vehicle (SDV) sales in the future, Honda is looking into opportunities to offer new financial services designed to increase customer satisfaction and the value of the customer experience using various data from Honda SDVs. With such new services, Honda will further strengthen its financial services business not only in India but across the globe. About the new companyName of the company:Honda Finance India Private Ltd.Established:August 1, 2025Location:Gurugram District, Haryana, IndiaCapital:280 million Indian rupee (INR)Capitalization ratio:100% Honda Motor Co., Ltd.Representative:Kei Yamada, President Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO & JAKARTA, Aug 20, 2025 - (JCN Newswire via SeaPRwire.com) - PT Bank Negara Indonesia (Persero) Tbk. (BNI) and PT JCB International Indonesia, a subsidiary of JCB International Co. Ltd., (JCB) proudly announce the launch of the BNI JCB Corporate Card in Indonesia. This premium credit card is thoughtfully designed to meet the diverse needs of Japanese corporations operating in Indonesia, supporting both their business operations and collaborations with local partners.Unveiled during BNI wondrX 2025, the card features an exclusive design inspired by the Tokyo cityscape. The launch event was attended by prominent figures including Masaki Yokawa, President & CEO of JCB International Co. Ltd.; Corina Leyla Karnalies, Consumer Banking Director of BNI; Abu Santosa Sudrajat, Treasury & International Banking Director of BNI; Rian Eriana Kaslan, Network & Retail Funding Director of BNI; and other board members.Masaki Yokawa, President & CEO of JCB International Co. Ltd., said: “The launch of our first corporate card product in Indonesia represents a significant milestone for JCB, as we aim to support the diverse business needs of Japanese companies and their local partners in the market. It also underscores our commitment to serving as a bridge between Japanese and Indonesian businesses, fostering stronger partnerships and enabling mutual growth through our financial services”.Corina Leyla Karnalies, Consumer Banking Director of BNI, added: “In line with the spirit of Be With You Every Step of the Way, corporate cardholders can enjoy various rewards that support their active and productive business activities, including complimentary access to executive lounge at five airports in Indonesia, green fee cashback at selected golf clubs, as well as special dining benefits at selected Japanese restaurants. Additional services include flexible credit limit adjustments, transaction notifications, 24/7 customer service, dedicated corporate PIC support, and assistance with corporate business travel needs through BNI TeleTravel.”As part of JCB's commitment to delivering valuable experiences for cardholders, particularly within the premium segment, BNI JCB Corporate cardholders also gain access to international airport lounges in Japan and other countries and territories. Additionally, they may enjoy exclusive benefits such as the Japan Dining Festival program in Indonesia. Looking ahead, JCB plans to introduce further programs and services designed to support the business growth of corporate cardholders.About BNI JCB Corporate CardThe card features a design inspired by the city of Tokyo, with a rising sun in the background symbolizing optimism and hope, reflecting a positive outlook for the future and a spirit of continuous growth.Companies can apply through the nearest BNI branch office, via the application link below, or a Relationship Manager via the Japan Desk.Application link: https://applycreditcard.bni.co.id/jcbcard?link_id=id_bni_jcbcard About JCBJCB is a major global payment brand and a leading credit card issuer and acquirer in Japan. JCB launched its card business in Japan in 1961 and began expanding worldwide in 1981. Its acceptance network includes about 56 million merchants around the world. JCB Cards are now issued mainly in Asian countries and territories, with more than 169 million cardmembers. As part of its international growth strategy, JCB has formed alliances with hundreds of leading banks and financial institutions globally to increase its merchant coverage and cardmember base. As a comprehensive payment solution provider, JCB commits to providing responsive and high-quality service and products to all customers worldwide. For more information, please visit: https://www.global.jcb/en/ContactAnna TakedaCorporate CommunicationsTel: +81-3-5778-8353Email: jcb-pr@info.jcb.co.jp Copyright 2025 JCN Newswire via SeaPRwire.com.

Tokyo, Japan, August 20, 2025 - (JCN Newswire via SeaPRwire.com) — NEC Corporation (NEC; TSE: 6701) today announced a Memorandum of Cooperation (MOC) with the United Nations World Food Programme (WFP) to strengthen collaborative development assistance in Africa, coinciding with the 9th Tokyo International Conference on African Development (TICAD 9). This will contribute to the aims of both parties to achieve the 2030 Agenda for Sustainable Development through innovative and efficient technology-enabled assistance, particularly in the areas of agriculture and global health/nutrition.WFP Executive Director, Cindy McCain (left) and NEC Corporate Senior Executive Vice President and CGAO, Shigehiro Tanaka (right)WFP, established in 1961, is a humanitarian aid agency of the United Nations whose mission is to eradicate world hunger by providing emergency food aid and development assistance in response to natural disasters and conflicts. Its activities are financed by contributions from national governments and donations from private organizations and individuals, and in 2024 it delivered food to approximately 124 million people.In recent years, the number of those in need of assistance has been increasing due to issues that include international conflicts, disasters, and pandemics, which pose serious challenges to achieving the United Nations Sustainable Development Goals (SDGs). WFP is working globally to create a world without hunger, and in order to achieve this goal with limited resources, it is essential to capitalize on technology that enhances the efficiency and effectiveness of assistance.WFP and NEC have launched initiatives for the monitoring of farmland in Ethiopia and Zambia, using the agricultural ICT platform "CropScope" (*1), and also collaborated to improve maternal and child nutrition in Ghana through the use of a digital health checkup mobile application (*2).Now, through the conclusion of this MOC, the organizations will contribute to building a more resilient and inclusive society by strengthening their collaboration mainly in the fields of agriculture and global health/nutrition, enhancing the functionality of CropScope and the digital health checkup mobile application, and utilizing various technologies to ensure sustainable development and to achieve the SDGs in Africa.Moreover, NEC will participate in the 9th Tokyo International Conference on African Development (TICAD 9) (*3) at Pacifico Yokohama in Yokohama, Japan, from August 20 (Wed.) to 22 (Fri.), 2025. During the event, NEC will hold seminars and exhibitions on agriculture and global health at the "TICAD Business Expo and Conference" and at the Japan Fair (*4)."We are pleased to strengthen our collaboration with WFP toward ensuring sustainable development in Africa. We are confident that, through this MOC, we can further create social value by co-creating with WFP and leveraging our expertise in technology."- Takayuki Morita, President and Chief Executive Officer, NEC(*1)Smart farming management | NEC(*2)Ajinomoto, Sysmex, and NEC improve maternal and child health and nutrition in Ghana: Press Releases | NEC(*3)The 9th Tokyo International Conference on African Development (TICAD 9)https://www.mofa.go.jp/region/africa/ticad/ticad9/index.html(*4)NEC to participate in "TICAD Business Expo and Conference" and thematic events for TICAD 9https://www.nec.com/en/press/202508/global_20250805_03.htmlAbout NEC CorporationNEC Corporation has established itself as a leader in the integration of IT and network technologies while promoting the brand statement of “Orchestrating a brighter world.” NEC enables businesses and communities to adapt to rapid changes taking place in both society and the market as it provides for the social values of safety, security, fairness and efficiency to promote a more sustainable world where everyone has the chance to reach their full potential. For more information, visit NEC at https://www.nec.com. Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, August 19th, 2025 - (JCN Newswire via SeaPRwire.com) - Hitachi High-Tech ("Hitachi High-Tech") is providing its MI Solutions using Materials Informatics ("MI") to the NOF Metal Coatings Group ("NOF"). We are working together to explore ways to improve the efficiency and sophistication of research and development operations. This has led to a more than 50% reduction in costs related to the number of experiments and time required, as well as to the discovery of new ideas that were difficult to achieve by our own know-how alone, thereby contributing to improved efficiency and sophistication in our research and development work.Background and OverviewNOF's high-performance thin layer coating technology is used to improve the durability and functionality of metals. NOF mainly develops and manufactures rust-proof materials that protect metals from rust, and provides them to a wide range of industries including the automotive and aviation industries, both in Japan and overseas. In recent years, there have been more and more demands regarding new value and product development, such as product safety and consideration for the environment. In addition, we have previously relied on the experience of experienced engineers for the advancement of research and development work, but as more experienced engineers are getting older and the number of young engineers increasing, we wanted to transform conventional methods and develop data-driven technologies in order to speed up our research and development process.Under these circumstances, Hitachi High-Tech provided its MI Solutions to NOF, aiming to accurately understand the current situation and identify key issues through repeated dialog, then provide continued support in solving these issues through MI and data analysis. As a result, NOF has managed to reduce the number and duration of experiments by more than 50% for research and development work of specific topics, compared to before using MI. They have also be enable to develop new ideas that could not be imagined using traditional methods, and have contributed to the development of more sophisticated and efficient products.The Specific Solution Offered by Hitachi High-TechMI, the core technology of Hitachi High-Tech's MI Solution, uses AI technology to predict physical properties and derive optimal conditions for manufacturing conditions and material blending ratios based on accumulated experimental data. Consulting support using MI and generative AI embodies the Lumada*1 3.0, which uses the Hitachi Group's domain knowledge and AI technology to transform data into value and resolve issues for customers and society.*1 Lumada: A collective term for solutions, services, and technologies based on Hitachi's advanced digital technologies for creating value from customers' data accelerating digital innovation.(1) Provision of a material data analysis environmentThey used Hitachi High-Tech's MI technology to analyze past study data for experimental candidates that can be expected to have the desired properties for development areas such as the anti-rust materials developed by NOF over many years. This led to a more than 50% reduction in costs related to the number of experiments and time required for specific research topics. It also led to new discoveries, which were difficult to achieve with conventional methods, demonstrating the effectiveness of data-driven development and contributing to the advancement of research and development.(2) Consulting support through customer successHitachi High-Tech directly provides customer support by data scientists and other people working on customer success at Hitachi High-Tech. This has enabled NOF to smoothly advance their use of MI even without in-house MI and data analysis experts. Also, by conducting thorough hearings with Hitachi High-Tech personnel, they were able to identify real issues in research and development work and propose appropriate approaches to resolve them, thereby improving efficiency and sophistication.Future OutlookHitachi High-Tech has been providing materials development solutions to a variety of domestic and overseas customers since 2021, focusing on materials and chemical manufacturers. NOF also has group companies overseas, and they are aiming to use MI technology at their overseas offices to further create value globally and increase adoption. The two companies will continue to work together to support the overseas expansion of NOF's use of MI technology, utilizing Hitachi High-Tech's expertise from providing solutions to a large number of customers. In addition, we will continue offering proposals and promoting collaborations aimed at improved efficiency and sophistication, such as further automation of research and development work, through seamless collaboration between MI and data generated from analysis equipment provided by Hitachi High-Tech, and through the use of AI technology and Hitachi Group assets.Going forward, Hitachi High-Tech will continue leveraging our capabilities of global frontline functions, domain knowledge, points of contact and technological capabilities to create solutions and business models that lead to solutions stemming from all forms of social issues, and to contribute to market growth in the industrial and social infrastructure fields.Related LinksMI Case study (NOF Metal Coatings)About MI SolutionsAbout Hitachi High-TechHitachi High-Tech provides cutting-edge technologies, products and services to society and customers with its corporate vision of "Changing the World and Future with the Power of Knowledge" to contribute to a sustainable global environment, healthy, safe and secure lives, and the sustained development of science and industry. We manufacture and sell clinical analyzers, biotechnology products and radiation therapy systems in the healthcare field, semiconductor manufacturing and inspection equipment in the semiconductor field, as well as analytical systems and electron microscopes used in environmental fields and materials research. We are also engaged in a wide range of business areas globally, providing high added-value solutions in battery, communication infrastructure, railway inspection, digital and other industrial and social infrastructure fields. We provide solutions through a deeper understanding of the issues facing society and our customers to contribute to realizing a sustainable society. The company's consolidated revenues for FY2024 were approx. JPY 756.5 billion. For further information, visit https://www.hitachi-hightech.com/global/en/Business ContactInformatics Promotion Dept.,Industrial & Social Infrastructure Business Group,Hitachi High-Tech CorporationInformatics.aj@hitachi-hightech.com Copyright 2025 JCN Newswire via SeaPRwire.com.

Tokyo, Japan, August 19, 2025 - (JCN Newswire via SeaPRwire.com) - NEC Corporation (NEC; TSE: 6701), in collaboration with ClimateAi, a San Francisco-based startup that built the first climate resilience platform, has developed a conceptual model to estimate the effectiveness of climate change adaptation measures for cocoa and rice cultivation in Africa. In this project, ClimateAi’s long-term climate change forecasting technology, which models both the impact of climatic factors on agricultural production and the effectiveness of adaptation measures, was combined with NEC’s expertise in agricultural technology (agritech) to successfully quantify the impact of climate change on agriculture and clarify the return on investment for adaptation measures.This achievement will be showcased at the TICAD Business Expo & Conference (Japan Fair), one of the thematic events of the Ninth Tokyo International Conference on African Development (TICAD 9) to be held in Yokohama, Japan, in August 2025, conveying the significance of utilizing digital technology to address the challenges facing African agriculture (*1).Background and purposeGlobally, while greenhouse gas emission reductions and credit trading are actively being conducted to mitigate the effects of climate change, the implementation of adaptation measures to prevent or reduce damage caused by climate change has not yet progressed. This is due in part to the difficulties involved in assessing the investment cost-effectiveness of implementing adaptation measures.Notably, although the agricultural sector is an industry highly susceptible to climate change, estimating the return on investment for adaptation measures, such as the introduction of irrigation facilities or changes in crop varieties, has thus far proven difficult due to the wide range of factors affecting crop growth, including temperature, water, and soil.NEC and ClimateAi have developed a conceptual model that analyzes various factors affecting agricultural growth using AI and calculates the economic return on investment for adaptation measures. Utilizing this model enables the implementation of adaptation measures that focus on areas where positive effects are expected, promoting local agriculture efficiently and sustainably.OverviewThis newly developed conceptual model was used to analyze adaptation measures targeting the cultivation of cocoa and rice in various locations in Africa. Africa is the world’s largest cocoa producer, with agriculture being one of its major industries. However, due to the impacts of climate change, the cultivation environment for cocoa and rice is expected to change significantly in the coming decades. This initiative focused on the following three adaptation measures to examine their ability to maintain and enhance yields and create economic value in a changing climate.Introduction of irrigation facilitiesChanging to climate-adapted varietiesChanging of planting time for traditionally cultivated varietiesSome of the analysis results can be verified through interactive demonstrations. As an example of potential applications for this conceptual model, it is envisioned that international organizations and development banks providing local agricultural support will utilize it to explore farmland in recipient areas and estimate the effects of implementing adaptation measures.Beyond this example, the system is designed to cater to the needs of various stakeholders involved in agriculture, enabling them to make data-driven decisions.Results and future prospectsThe utilization of AI made it possible to analyze the cost-effectiveness of adaptation measures, such as the introduction of irrigation facilities and changes in cultivation varieties in rice farming across various regions, as well as effective adaptation strategies for cacao cultivation.Significant funding is required to advance climate change adaptation in agriculture. It has been pointed out that in addition to the need for financial support from international organizations, development banks, and governments, the mobilization of private investment is necessary. To provide continuous funding, it is essential to quantify the investment returns from adaptation measures and to conduct proper monitoring and intervention following their implementation.While exploring opportunities for collaborations with businesses that provide irrigation equipment and seedlings, NEC and ClimateAi aim to leverage digital technology use cases to promote financing for climate change adaptation and expand data-driven agritech businesses.Adaptation finance businessSupport for understanding risks to agricultural yields to reduce entry barriers for the private sector / Support for evaluating business feasibility for financingAgritech businessSupport for agricultural producers and managers of climate change adaptation / Support for climate change adaptation in the upstream (seed and agricultural material businesses) and downstream (processing businesses, etc.) of the agricultural supply chainOther businessSupport for climate change adaptation in the infrastructure industry and manufacturing supply chainsThe results of this initiative will be announced at the TICAD Business Expo & Conference (Japan Fair) and other events to gather feedback from the market and proceed with discussions toward commercialization. Going forward, NEC and ClimateAi will work together to scientifically assess the impact of climate change on agriculture and present concrete solutions to achieve sustainable agriculture and food security. Both companies will continue striving to solve global agricultural challenges through technological innovation and data utilization.NEC’s new business development, under the key message "The future is ours to shape," is advancing NEC Open Innovation (*2) through diverse co-creation with a wide range of startups and partner companies. NEC’s collaboration with ClimateAi is one such initiative. By uniting innovative technologies with cross-domain collaboration, NEC continues to create new social value and shape the future.(*1)NEC to participate in "TICAD Business Expo and Conference" and thematic events for TICAD 9 https://www.nec.com/en/press/202508/global_20250805_03.html(*2)NEC Open Innovation https://www.nec.com/en/global/innovation/index.htmlAbout ClimateAi, Inc.ClimateAi is a climate adaptation and resilience platform purpose-built for the agriculture, food, and consumer goods sectors. It combines AI-powered weather modeling with phenological and water-scarcity data to deliver highly localized, crop-specific agricultural impact insights across the short, medium, and long term. With deep expertise in climate–agriculture interactions and a client base that spans agricultural and consumer-goods multinationals as well as agricultural investors, ClimateAi turns complex climate data into actionable insights. For more information, visit ClimateAi at https://www.climate.aiAbout NEC CorporationNEC Corporation has established itself as a leader in the integration of IT and network technologies while promoting the brand statement of “Orchestrating a brighter world.” NEC enables businesses and communities to adapt to rapid changes taking place in both society and the market as it provides for the social values of safety, security, fairness and efficiency to promote a more sustainable world where everyone has the chance to reach their full potential. For more information, visit NEC at https://www.nec.com. Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, August 18, 2025 - (JCN Newswire via SeaPRwire.com) – Mitsubishi Motors Corporation (hereafter, Mitsubishi Motors) announced that Team Mitsubishi Ralliart, which receives technical support from the company, has won first place in the Asia Cross Country Rally (AXCR) 2025, held in Thailand from August 8 to 16. The team competed with the Triton1 pickup truck (T1 specification, or modified cross-country vehicle), covering a total distance of 2,316.32 kilometers (km), including 1,002.95 km of Special Stages (SS)2.Team Mitsubishi RalliartIn the overall standings, Chayapon Yotha secured first place with a total time of 16 hours, 15 minutes and 12 seconds; Katsuhiko Taguchi finished in fifth place; and Kazuto Koide placed 22nd overall. The team also earned the Team Award – given to teams with three or more finishers based on the combined time of their top two vehicles – for the second time, and the first in two years.This year’s AXCR kicked off with a ceremonial start at Walking Street, a well-known tourist spot in Pattaya, Thailand. The rally officially began the following day with Leg 1, traveling roughly 360 km northeast from Pattaya to Prachin Buri in eastern Thailand. This leg featured the rally’s longest SS, spanning 199.13 km.Leg 2 took competitors about 500 km north from Prachin Buri to Khao Yai. The SS included a mix of rocky terrain and high-speed sections through plantations, highlighting the diverse landscapes AXCR is known for. Leg 3 remained in the Khao Yai area, where the already demanding course was made even tougher by afternoon squalls that turned the roads muddy, causing many vehicles to struggle.Legs 4 and 6, originally planned to run within 50 km of the Cambodian border, were canceled due to safety concerns. Leg 5 proceeded as scheduled, returning to Prachin Buri for an SS near the city. Although the route followed the same path as SS1, the course had deteriorated significantly due to deep ruts left by vehicles in Leg 1 and fallen trees caused by continuous rain. Even top teams were caught in the mud, making it one of the most grueling days of the rally.In Leg 7, the rally returned to Pattaya, retracing parts of the SS1 and SS5 routes. This stage featured narrow paths through plantations, pothole-ridden roads, and river crossings. The final day, Leg 8, concluded at Bali Hai Pier in Pattaya.Team Mitsubishi Ralliart Driver HighlightsChayapon Yotha, the team’s ace driver, started in 12th position but quickly climbed the ranks with strong times in Leg 1, ending the first day in second place. Thanks to precise navigation by co-driver Peerapong Sombutwong and consistent driving that pushed for speed while minimizing mechanical strain, he took the overall lead in Leg 3. Despite getting stuck in deep mud during Leg 5, he maintained an aggressive pace and recorded the second fastest SS time in Leg 7. He held onto the lead and won the rally by a narrow margin of seven minutes, claiming his second overall AXCR victory – his first in three years.Katsuhiko Taguchi began in a strong fifth position and remained among the frontrunners in the early stages. However, in Leg 3, rough terrain damaged the front suspension and dropped him to 10th overall. In Leg 5, where many vehicles struggled with deep mud, he overtook 18 competitors and posted the fastest SS time, recovering to sixth overall. Despite damage to the under guard and rear suspension on the demanding Leg 7 course, his determined driving earned him a fifth place overall – the highest among Japanese pairs – concluding his third AXCR challenge.Kazuto Koide, competing in his second year as a corporate driver, faced early setbacks. On the first day, poor visibility from dust led to a collision with a suddenly stopped vehicle, resulting in a day retirement, and in Leg 5, he experienced rear brake failure. Despite these issues, he supported teammates dealing with mechanical troubles in Legs 3 and 8, fulfilling his role as a support vehicle. He improved on last year’s result, finishing 22nd overall.Comments from Team Mitsubishi RalliartHiroshi Masuoka, Team Director“Winning was our top priority this year, and I am thrilled we achieved it while showcasing the strength and audacity of Mitsubishi Motors-ness. Securing the team award is a testament to the collective effort and determination of everyone at Team Mitsubishi Ralliart. By refining the Triton’s core strengths – its stability on high-speed stages and agility on winding roads – we gained a competitive edge over rivals with larger-displacement engines. Looking ahead to next year, we will continue to enhance the vehicle to further boost our competitiveness.”Chayapon Yotha, Driver of Car #112“I am truly happy to have claimed overall victory once again, thanks to the entire team playing their part perfectly and delivering a flawless vehicle. This year’s rally was extremely demanding, with rocky sections, mud, and slippery terrain. Yet, the Triton’s durability and exceptional handling allowed me to stay in control through high-speed corners and technical muddy stretches, delivering top-tier performance. I will be back next year to defend the championship.”Katsuhiko Taguchi, Driver of Car #105“Although I finished fifth again this year, I can clearly see how much our crew has improved. We consistently posted competitive times against larger-displacement vehicles across all stages, even recording the fastest SS time in Leg 5. The Triton continues to evolve year after year, and its suspension and handling capabilities were crucial in tackling rough terrain and contributing to Chayapon’s victory. After the rally, we identified areas where we can gain more time, so with thorough testing to build on our strengths, I am confident we can achieve even better results next year.”Kazuto Koide, Driver of Car #118“Although the rally was mentally demanding, especially with a day retirement, it was an invaluable experience. The Triton I drove was equipped with an automatic transmission using standard production components, yet it proved remarkably resilient even under the harsh conditions of AXCR. The handling and maneuverability I experienced will provide valuable feedback for future vehicle development, and I look forward to applying these insights to the next generation of Mitsubishi models.”AXCR 2025 Auto Category – Overall Standings1.Chayapon Yotha (Mitsubishi Triton)16 h 15 m 12 s2.Mana Pornsiricherd (Toyota Hilux Revo)16 h 23 m 03 s3.Bailey Cole (Ford Raptor)17 h 08 m 29 s4.Ditsapong Maneein (Isuzu D-Max)17 h 09 m 32 s5.Katsuhiko Taguchi (Mitsubishi Triton)17 h 37 m 56 s6.Natthaphon Angritthanon (Toyota Hilux Revo)17 h 46 m 52 s…22.Kazuto Koide (Mitsubishi Triton)29 h 34 m 31 sRally reports are available on Ralliart’s official Instagram account. https://www.instagram.com/ralliart.official/AXCR Special Website:https://www.mitsubishi-motors.com/en/brand/ralliart/axcr/axcr2025/1.Sold as L200 in some markets2.The actual distance was shortened due to course changes.About Mitsubishi MotorsMitsubishi Motors Corporation (TSE:7211) — a member of the Alliance with Renault and Nissan — is a global automobile company based in Tokyo, Japan, which has about 28,000 employees and a global footprint with production facilities in Japan and the ASEAN region. Mitsubishi Motors has a competitive edge in SUVs, pickup trucks and plug-in hybrid electric vehicles, and appeals to ambitious drivers willing to challenge convention and embrace innovation. Since the production of our first veh icle more than a century ago, Mitsubishi Motors has been a leader in electrification — launched the i-MiEV, the world’s first mass-produced electric vehicle in 2009, followed by the Outlander PHEV, the world’s first plug-in hybrid electric SUV in 2013. With a target of increasing the sales ratio of electrified vehicles to 100% by 2035, Mitsubishi Motors will deliver models that embody Mitsubishi Motors-ness and contribute to the realization of a carbon-neutral society. For more information on Mitsubishi Motors, please visit the company's website at https://www.mitsubishi-motors.com/en/ Copyright 2025 JCN Newswire via SeaPRwire.com.

Tokyo, Japan, August 18, 2025 - (JCN Newswire via SeaPRwire.com) — NEC Corporation (NEC; TSE: 6701) today announced the signing of a Memorandum of Understanding (MOU) with the United Nations Population Fund (UNFPA) (*1), which promotes activities to protect the health and rights of women and girls, to collaborate on the development of a beneficiary information management system.Both parties will promote digitization in the management of beneficiary information supported by the UNFPA and implement privacy-conscious operations, thereby contributing to the provision of rapid, safe, and secure support. This system will be implemented in Nigeria and Madagascar by the end of 2025, supported by the Ministry of Foreign Affairs in Japan and aiming to build on this partnership in other parts of the world.NEC Chief of Staff for the CDO and Head of the Marketing & Alliance Promotion Department, Mayuko Tatewaki (left), UNFPA Director, Division for External Relations, Ian McFarlane (center left), UNFPA Director, Information Technology Solution Office, Soren Thomassen (center right), and UNFPA Chief, Representation office in Tokyo, Japan, Eiko Narita (right)The UNFPA is the United Nations sexual and reproductive health agency. The UNFPA’s mission is to deliver a world where every pregnancy is wanted, every childbirth is safe and every young person's potential is fulfilled. The agency began operating in 1969 and currently works with partners in more than 150 countries to provide access to a wide range of sexual and reproductive health services.In recent years, an increase in international conflicts, and natural disasters caused climate change have led to ongoing social and economic unrest around the world. Amidst this situation, it is imperative to promote sexual and reproductive health and rights (SRHR), including addressing gender-based violence (GBV) against women and girls.To address these challenges more rapidly and safely, the UNFPA and NEC will establish a beneficiary information management system based on an e-Voucher system, which is NEC's solution for the registration and management of beneficiary information, that digitizes and centrally manages information such as names, addresses, and details of the support provided for beneficiaries, which was previously managed on paper. This will enable the UNFPA to accurately identify the needs of beneficiaries, such as the kinds of support required for each region, and to develop support plans accordingly, thereby achieving swift and effective support delivery.Additionally, to appropriately handle beneficiary information containing sensitive content, the system will be designed to ensure the privacy of beneficiaries, and the UNFPA will receive NEC training on data literacy, ensuring safe and secure operations that prioritize privacy protection.Moreover, NEC will participate in the 9th Tokyo International Conference on African Development (TICAD 9) (*2) at Pacifico Yokohama in Yokohama, Japan, from August 20 (Wed.) to 22 (Fri.), 2025. At this event, NEC will introduce its initiatives at the TICAD Business Expo and Conference exhibition hall (*3) and at the UNFPA-planned event stage (*4)."This is a great partnership opportunity that leverages resources from both public and private sectors for a greater impact on the ground, especially for women and girls to enjoy their ‘rights and choices’."Ian McFarlane, Director, Division for External Relations, UNFPA"We are pleased to contribute to the UNFPA's acceleration of its activities around the world by leveraging NEC's digital technology. We are confident that this collaboration will bring about digital transformation in the fields of humanitarian aid and global health."Mayuko Tatewaki, Chief of Staff for the CDO and Head of the Marketing & Alliance Promotion Department, NEC(*1)United Nations Population Fund https://www.unfpa.org/(*2)The 9th Tokyo International Conference on African Development (TICAD 9) https://www.mofa.go.jp/region/africa/ticad/ticad9/index.html(*3)NEC to participate in "TICAD Business Expo and Conference" and thematic events for TICAD 9https://www.nec.com/en/press/202508/global_20250805_03.html(*4)Investing in Peace: Digital Transformation (DX) in Health for Adolescent Youth and Women https://tokyo.unfpa.org/ja/event/ticad9_thematic (scroll down the link for English)About NEC CorporationNEC Corporation has established itself as a leader in the integration of IT and network technologies while promoting the brand statement of “Orchestrating a brighter world.” NEC enables businesses and communities to adapt to rapid changes taking place in both society and the market as it provides for the social values of safety, security, fairness and efficiency to promote a more sustainable world where everyone has the chance to reach their full potential. For more information, visit NEC at https://www.nec.com. Copyright 2025 JCN Newswire via SeaPRwire.com.

KYOTO, August 19, 2025 - ACN Newswire via SeaPRwire.com - The Value Research Center at Doshisha University proudly announces The Valuism Conference 2025, taking place August 28–29, 2025, in a hybrid format, both in-person in Kyoto and online. The conference will run daily from 9:00 AM to 6:00 PM JSTA New Framework for Value CreationThis inaugural Valuism gathering aims to advance a novel integrative framework, Valuism, designed to address pressing challenges in sustainability, long-term resilience, and multi-stakeholder value creation. Attendees will explore how philosophical insight, cutting-edge technologies (e.g., AI, blockchain, big data), and cross-sector collaboration can foster transparency, ethical decision-making, and real-time measurement of value.Featuring keynote speeches, expert panels, and interactive sessions, The Valuism Conference 2025 will cover:- Philosophical foundations and real-world applications of Valuism Strategies for monetizing and scaling intangible assets - The role of emerging technologies in sustainable and ethical business practices- Cross-sector approaches that benefit companies, communities, shareholders, employees, and the environment.Registration and TicketingA range of ticket options accommodates different audiences:General Admission (in-person) - ¥15,000 Corporate Admission (for up to 3 participants) - ¥40,000 Online only Admission - ¥5,000 Student Admission - ¥3,000 Students from Kansai universities (Doshisha University, Osaka University, Kyoto University, Kobe University and Kansai University) can attend for freeThe Valuism Conference 2025 offers a unique opportunity for leaders in academia, business, government, and civil society to shape a more holistic and responsible value paradigm for the 21st century.For full program details, speaker bios, and registration, visit: The Valuism Conference 2025 page on the Value Research Center site. https://www.valueresearchcenter.com/valuismconference2025 About the Value Research CenterFounded in November 2021, the Value Research Center (VRC) at Doshisha University is dedicated to developing frameworks, metrics, and reporting tools that capture value generated or lost across seven stakeholder domains: the organization, shareholders, customers, employees, partners, society, and the planet. https://www.valueresearchcenter.com Contact: Value Research Center, Doshisha University Email: psugai@mail.doshisha.ac.jp Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, Aug 18, 2025 - (JCN Newswire via SeaPRwire.com) - Anime Tokyo Station, an exhibition center for Japanese anime operated by the Tokyo Metropolitan Government and the Association of Japanese Animations, is a facility that promotes the appeal of Japanese anime to the world under the motto “Making ANIME more interesting, Bringing ANIME far into the future.” The facility has welcomed numerous visitors from Japan and overseas, and on August 3, 2025, the number of visitors surpassed 200,000.The 200,000th visitors were a group of three from Fukuoka and Kanagawa Prefectures, and they shared their surprise and delight: “Today we happened to pass by Anime Tokyo Station and decided to come in because we love anime. We didn’t know this facility existed. We’re surprised to be here at such a commemorative moment—celebrating the 200,000th visitor.” When asked about which exhibits left an impression on them, they commented, “We were amazed to see the anime production materials archive and the anime production process exhibits on the first basement floor. It really hit us that anime is something that is actually created by people. It’s incredible.”Anime Tokyo Station preserves approximately 50,000 valuable materials related to past anime production processes. The facility serves as a launch point into the world of anime, where a variety of people such as travelers visiting Tokyo from all over the world can gather and enjoy discovering both past masterpieces and the latest popular series. Going forward, we will share the appeal of anime and Tokyo with a wide range of anime fans both in Japan and overseas.Venue Overview- Name: Anime Tokyo Station (also known as "Anime Tokyo")- Location: Floors B1 to 2F of Tokyu East 5 (2-25-5 Minami-Ikebukuro, Toshima-ku, Tokyo)*4 minutes on foot from the East Exit of Ikebukuro Station- Hours: 11:00 a.m. to 7:00 p.m. (last admission: 6:45 p.m. / Special exhibitions last admission: 6:30 p.m.)- Closed: Mondays*If Monday falls on a holiday, the venue will be open on Monday and closed on the following dayNew Year's holiday periodMay be closed on other daysPlease check the venue website before coming.- Admission fee: Free- Website: https://animetokyo.jp/en/- SNS:X | https://x.com/animetokyo_info (@animetokyo_info)Instagram | https://www.instagram.com/animetokyostation/ (@animetokyostation)YouTube | https://www.youtube.com/@アニメ東京ステーションInquiries regarding this press releasePublic Relations Office of "Anime Tokyo Station" (Kyodo PR)Contact person: Miri YasudaE-mail: animetokyo-pr@kyodo-pr.co.jp Press release: https://www.acnnewswire.com/docs/files/20250818.pdf Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, August 18, 2025 - (JCN Newswire via SeaPRwire.com) - Eisai Co., Ltd. (Headquarters: Tokyo, CEO: Haruo Naito, “Eisai”) announced today that the in-house discovered and developed orexin receptor antagonist DAYVIGO® (brand name in China: “DAYVIGO®“ generic name: lemborexant) has launched in China for the treatment of adults with insomnia, characterized by difficulties with sleep onset and/or sleep maintenance. Eisai received approval for DAYVIGO in China on May 27, 2025. This marks the first orexin receptor antagonist to be launched in China.DAYVIGO is a dual orexin receptor antagonist that inhibits orexin neurotransmission regulating sleep-wake rhythm by binding competitively to the two subtypes of orexin receptors (OX1R and OX2R). Unlike conventional treatments such as benzodiazepines that act directly on sleepiness, DAYVIGO acts on the orexin neurotransmitter system, which regulates wakefulness. DAYVIGO is believed to facilitate sleep on set and sleep maintenance, and wake by regulating sleep-wake rhythm by suppressing hyperactive wakefulness. DAYVIGO binds to orexin receptors OX1R and OX2R and acts as a competitive antagonist with stronger inhibition effect on OX2R, which suppresses both REM and non-REM sleep drive, such that DAYVIGO may provide faster sleep onset and better sleep maintenance to patients.Insomnia is characterized by difficulty falling asleep, staying asleep, or both despite an adequate opportunity to sleep, that has occured at least three times a week for at least one month, and which can lead to fatigue, difficulty concentrating and irritability.1,2 The prevalence of insomnia among adults in China is reported to be 15.0%3, with approximately 172.5 million people thought to suffer from insomnia.4 Currently, the mainstream prescription drugs for insomnia in China are treatments that act directly on sleepiness, and there is increasing demand for new treatment options.Eisai will deliver novel action mechanism, DAYVIGO, as a new treatment option to Chinese insomnia patients with the hope of contributing to restoration of daytime function and recovery for patients with insomnia by potentially delivering an active daytime life through fast sleep onset and good quality sleep.“DAYVIGO®” Product OutlineChinese Trade name:(DAYVIGO)Chinese generic name:(Lemborexant Tablets)Indication for use: Insomnia in adults that characterized by difficulties with sleep onset and/or sleep maintenance Dosage and administration: The recommended dosage of DAYVIGO is 5 mg taken once per night, immediately before going to bed, with at least 7 hours remaining before the planned time of awakening. The dose may be increased to the maximum dose of 10 mg.About DAYVIGO (Generic Name: Lemborexant)DAYVIGO, an orexin receptor antagonist, is Eisai’s in-house discovered and developed small molecule that inhibits orexin neurotransmission by binding competitively to the two subtypes of orexin receptors (orexin receptor 1 and 2). Fast on/off receptor kinetics of lemborexant to orexin receptors may influence lemborexant’s potential to facilitate improvements in sleep onset and maintenance with minimal morning residual effects. It has been approved for the treatment of insomnia in more than 25 countries including Japan, the United States, Canada, Australia and countries in Asia.1. Ferrie JE, et al. Sleep epidemiology – a rapidly growing field. Int J Epidemiol. 2011;40(6):1431–1437.2. Roth T. Insomnia: definition, prevalence, etiology and consequences. J Clin Sleep Med. 2007;3(5 Suppl):S7–S10.3. Cao X-L, et al. The prevalence of insomnia in the general population in China: A meta-analysis. PLoS ONE 2017,12(2):e0170772.4. Internal estimateMedia Inquiries:Public Relations Department,Eisai Co., Ltd.+81-(0)3-3817-5120 Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, Aug 15, 2025 - (JCN Newswire via SeaPRwire.com) - TANAKA PRECIOUS METAL GROUP Co., Ltd. (Head office: Chuo-ku, Tokyo; Group CEO: Koichiro Tanaka) celebrated the 140th anniversary of its founding in July 2025. To commemorate the occasion, it held a "140th Anniversary Press Conference" on July 31 at KABUTO ONE in Nihonbashi Kabutocho.TANAKA PRECIOUS METAL GROUP Co., Ltd. CEO Koichiro TanakaSpeaking at the press conference were Koichiro Tanaka, Group CEO of TANAKA PRECIOUS METAL GROUP Co., Ltd., Masakazu Tanaka, CEO of TANAKA PRECIOUS METAL RETAILING Co., Ltd., and Tomoyuki Tada, COO of TANAKA PRECIOUS METAL TECHNOLOGIES Co., Ltd. The three reflected on TANAKA’s history as a leading company in the precious metals industry, from its head office in Nihonbashi Kayabacho, where the Group was founded, and highlighted its contributions to society through precious metals.Turning to the Group's future outlook, the speakers clarified plans to strategically focus on two pillars of business: retail business and industrial business. They presented TANAKA’s ambidextrous management approach, which aims to achieve ultra-long-term growth leading up to the Group’s 200th anniversary in 2085 and reflects TANAKA’s commitment to creating present-day value while actively embracing future challenges.Contents of speakers' presentationsLooking back on the Group's 140 years of history, Group CEO Koichiro Tanaka provided an overview of its current business and presented how it has taken on new challenges and innovated. He followed with an explanation of the Group's overall future strategies and its vision for growth, and also announced a business partnership with JEPLAN, Inc., with the goals of reducing CO2 emissions from precious metal recovery processes and recycling organics. Group CEO Tanaka commented, "TANAKA, which has worked to create a circular economy in the field of precious metals, and JEPLAN, which has worked toward the same goal in the plastics field, will work together to help achieve decarbonization and create a circular society."CEO Masakazu Tanaka touched on how the retail business has changed and its current business situation, explaining what direction TANAKA would take with the products in its asset and jewelry businesses and its strategies for responding to the increasingly diverse needs of customers. He also talked about how the Group would promote more accurate knowledge about gold and raise awareness regarding gold trading through ongoing communications. During his presentation, he announced that from November 21, 2025, the names of the Group's directly-operated shops would change from GINZA TANAKA to TANAKA PRECIOUS METALS to unify its precious metals retail business.Lastly, COO Tomoyuki Tada addressed the current state and future direction of technological innovation and market expansion in industrial precious metal products, discussing in particular the Group's approach of accelerating the realization of a circular society by linking precious metal recycling and product manufacturing. He also discussed how the Group was working to build and expand its global recycling system by further deepening its collaboration with Group company Metalor Technologies SA, and emphasized the Group’s commitment to building a sustainable and healthy society through its pioneering efforts in key areas such as the hydrogen economy, semiconductors, and medical fields. His presentation also introduced technology development projects aimed at creating new demand for platinum group metals and showed the Group's desire to take advantage of future growth potential.TANAKA PRECIOUS METAL RETAILING Co., Ltd.CEO Masakazu TanakaTANAKA PRECIOUS METAL TECHNOLOGIES Co., Ltd.COO Tomoyuki TadaThe event site also had a timeline of the Group's 140-year history, graphs of changes in gold prices released by TANAKA, exhibitions of products and services offered by the Group in the retail business segment, industrial precious metal products, and industrial precious metal technologies.Panels showing TANAKA's 140-year long history and changes in the prices of gold and platinum Retail Business: Featured Products Industrial Business: Featured Products To realize the TANAKA Renaissance Plan, an ultra-long-term company management plan for leading up to the Group’s 200th anniversary in 2085, TANAKA will continue to promote technical and business development. Through the creation of value in emerging fields, TANAKA aims to contribute to a brighter and more sustainable future.About TANAKASince its foundation in 1885, TANAKA has built a portfolio of products to support a diversified range of business uses focused on precious metals. TANAKA is a leader in Japan regarding the volume of precious metals it handles. Over many years, TANAKA has manufactured and sold precious metal products for industry and provided precious metals in such forms as jewelry and assets. As precious metals specialists, all Group companies in Japan and worldwide collaborate on manufacturing, sales, and technology development to offer a full range of products and services. With 5,591 employees, the group's consolidated net sales for the fiscal year ending December 2024, was 846.9 billion yen.TANAKA PRECIOUS METAL GROUP Co., Ltd.TANAKA Corporate Websitehttps://www.tanaka.co.jp/english/Press inquiriesTANAKA PRECIOUS METAL GROUP Co., Ltd.https://www.tanaka.co.jp/support/req/other_contact_e/index.htmlPress release: https://www.acnnewswire.com/docs/files/20250815.pdf Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, August 14, 2025 - (JCN Newswire via SeaPRwire.com) - Mitsubishi Corporation (“MC”) is pleased to announce that it has reached an agreement to acquire a 30% interest in the Copper World copper mine project (the “Project") owned by Hudbay Minerals Inc. ("Hudbay") for a total consideration of USD 600 million (approximately JPY 87 billion), consisting of USD 420 million (approximately JPY 61 billion) as consideration for equity interest and USD 180 million (approximately JPY 26 billion) as matching contribution which will be allocated toward development costs. MC and Hudbay will jointly conduct a definitive feasibility study for the Project.The U.S. is the world's second-largest consumer of copper, and steady demand growth is expected to continue, driven by population growth, increased power demand from generative AI and data center expansion, and the shift toward electrification. Arizona, where the project is located, accounts for approximately 70% of domestic copper mine production and is a leading mining region with strong access to key infrastructure. The project has already secured the permits required for development and commencement of operations, and is expected to start around 2029, with an anticipated output of approximately 100,000 tonnes of copper per year at peak. There is also potential for future mine expansion by securing permits to access adjacent mining concessions.Hudbay has cultivated extensive experience in mine development and operations since its establishment in 1927. The company currently operates three copper and gold mines and holds two other development projects in addition to the Project. MC has long been engaged in a wide range of businesses in North America, primarily in the U.S., and has invested in various mineral resources through partnerships with mining companies globally. Regarding copper, MC aims to expand its annual equity production to over 400,000 tonnes from FY2030 onwards, leveraging its expertise in global copper mining investments and trading activities. This investment is part of MC’s efforts to achieve that target. MC will advance a definitive feasibility study together with Hudbay, aiming for a final investment decision around 2026, drawing on MC’s knowledge in copper mining investment and extensive business experience across diverse sectors in North America developed over many years.As outlined in its Corporate Strategy 2027, “Leveraging Our Integrated Strength for the Future,” announced in April 2025, MC aims to expand its equity-based resource production and strengthen its competitive edge through its value-creation framework: “Enhance, Reshape, and Create.” Copper is projected to see sustained long-term demand growth. At the same time, challenges such as declining ore grades are making new mine development more difficult, raising concerns about supply stability. MC remains committed to securing and maintaining a stable supply of copper resources, which is essential for achieving a decarbonized society.Copper World Project SiteProject OverviewLocationTucson, Arizona, USAMining MethodOpen PitOre Reserves*2 MtResource Estimate**5 MtProduction StartAround 2029Maximum Annual ProductionApproximately 100,000 tonnesLife of Mine20 years (potential for further expansion)*Economically mineable part of resources**Total quantity of minerals confirmed through geological surveysHudbay OverviewCompany NameHudbay Minerals Inc.HeadquartersToronto, Ontario, CanadaEstablished1927CEOPeter KukielskiListingsToronto Stock Exchange, New York Stock ExchangeBusiness ActivitiesDevelopment and operation of copper and gold mines in Canada, the United States, and Peru Mitsubishi CorporationMitsubishi Corporation (MC) is an integrated trading and investment company that develops and operates businesses across multiple industries together with its global network. MC has eight business segments that span virtually every industry: Environmental Energy, Materials Solution, Mineral Resources, Urban Development and Infrastructure, Mobility, Food Industry, Smart-Life Creation, and Power Solution.Inquiry RecipientMitsubishi CorporationTelephone:+81-3-3210-2171 Copyright 2025 JCN Newswire via SeaPRwire.com.

Team Mitsubishi RalliartTOKYO, August 7, 2025 - (JCN Newswire via SeaPRwire.com) - Mitsubishi Motors Corporation (hereafter, Mitsubishi Motors) announced that Team Mitsubishi Ralliart, which receives technical support from the company, will compete in the upcoming Asia Cross Country Rally (AXCR) 2025 scheduled for August 8 to 16 in Thailand1. The team will enter three Triton2 pickup trucks, aiming for its first overall championship in three years.In early June, the team conducted high-load endurance tests simulating actual rally conditions on off-road courses around Khao Yai National Park in central Thailand, covering distances that exceeded the expected length of this year's Special Stages. Throughout the testing, the team fine-tuned the suspension and other chassis components, while also verifying the reliability and durability of the engine and body.On August 5, three days before the start of the rally, the team carried out a shakedown at a test course in Thailand to check each part of the vehicle, ensuring it is in optimal condition for the 2025 competition."Building on the significant upgrade in driving performance last year, the Triton rally car has undergone further enhancements for this year's AXCR," said Hiroshi Masuoka, team director of Team Mitsubishi Ralliart. "In addition to increasing engine torque and improving durability, we have refined the chassis to enhance both steering stability during high-speed cornering and reliable traction in muddy terrain. The rally will take place in northeastern Thailand, a landscape with sprawling plantations and flat dirt roads. This means we can expect high-speed racing, and I am confident that our refined chassis will demonstrate its strengths. One of our rally cars serving as a support vehicle is equipped with an automatic transmission (AT). We aim to successfully navigate the harsh conditions of the AXCR, verify the durability and reliability of the AT model, and gather feedback to apply to our future vehicle development. I hope we can showcase the strength and audacity of Mitsubishi Motors-ness by reclaiming the overall victory for the first time in three years."Overview of AXCR 2025This year marks the 30th anniversary of the AXCR, drawing a significantly larger number of participants - 93 vehicles in total: 47 in the Auto category, 44 in the Moto category, and 2 in the Sidecar category. The rally will kick off with a ceremonial start at Walking Street in the city of Pattaya, one of Thailand's major tourist destinations on the east coast of the Gulf of Thailand. The rally proper begins with Leg 1 to Prachin Buri, approximately 130 kilometers from Bangkok. Leg 2 runs from Prachin Buri to Khao Yai, one of Thailand's leading highland resort areas, while Leg 3 takes place within Khao Yai. Leg 4 returns to Prachin Buri, and the rally will remain in the Prachin Buri area for Legs 5 and 6. In Leg 7, the rally returns to the starting point in Pattaya, and on the final day, Leg 8 finishes at the Bali Hai Pier in Pattaya.Overview of Team Mitsubishi Ralliart Support CarsFour Delica D:5s will once again assist Team Mitsubishi Ralliart as support cars. Team engineers will wait for the rally cars at the Passage Controls located along the course and perform maintenance on the cars returning from the Special Stages. This means that the support cars carrying the team director and engineers must be able to reach their destinations without fail, regardless of road conditions.The Delica D:5 is an all-around minivan featuring a robust body with a rib-bone frame and an electronically-controlled 4WD system that provides optimal maneuverability and road handling in a variety of weather and road conditions. Having operated as the support car for Team Mitsubishi Ralliart in the AXCR since 2023, it will once again be used this year by Team Director Hiroshi Masuoka to inspect the rally course. In order to enhance handling on rough terrain, the vehicle is equipped with an aluminum engine guard and is lifted by approximately 20 millimeters using dedicated front and rear suspension.The support cars will also share the same livery as the Triton rally cars this year, featuring the team's signature energetic red and a digital sandstorm graphic that evokes swirling dust, stretching from the front to the center of the vehicle. The Ralliart logo is displayed on both sides of the body.Updates on the rally will be posted on Ralliart's official Instagram account. https://www.instagram.com/ralliart.official/AXCR Special Website: https://www.mitsubishi-motors.com/en/brand/ralliart/axcr/axcr2025/1. Due to the closure of the border between Thailand and Cambodia, the event is now being held in Thailand only.2. Sold as L200 in some markets.About Mitsubishi MotorsMitsubishi Motors Corporation (TSE:7211) — a member of the Alliance with Renault and Nissan — is a global automobile company based in Tokyo, Japan, which has about 28,000 employees and a global footprint with production facilities in Japan and the ASEAN region. Mitsubishi Motors has a competitive edge in SUVs, pickup trucks and plug-in hybrid electric vehicles, and appeals to ambitious drivers willing to challenge convention and embrace innovation. Since the production of our first vehicle more than a century ago, Mitsubishi Motors has been a leader in electrification — launched the i-MiEV, the world's first mass-produced electric vehicle in 2009, followed by the Outlander PHEV, the world's first plug-in hybrid electric SUV in 2013. With a target of increasing the sales ratio of electrified vehicles to 100% by 2035, Mitsubishi Motors will deliver models that embody Mitsubishi Motors-ness and contribute to the realization of a carbon-neutral society. For more information on Mitsubishi Motors, please visit the company's website at https://www.mitsubishi-motors.com/en/ Copyright 2025 JCN Newswire via SeaPRwire.com.

Toyota City, Japan, August 7, 2025 - (JCN Newswire via SeaPRwire.com) - Toyota Motor Corporation (Toyota) announced today that it plans to acquire land in the Teihoucho area of Toyota City, Aichi Prefecture, Japan, to establish a new vehicle manufacturing plant.Operations at the new plant are planned to start in the early 2030s, with production models to be determined in the future.The establishment of the plant will proceed with the cooperation of all stakeholders, including Aichi Prefecture, Toyota City, and local residents.In addition to maintaining production capacity of 3 million vehicles in Japan, Toyota is also working on creating a "plant of the future" that uses cutting-edge technology and provides an environment where a diverse workforce can thrive.Toyota will continue to aspire to be the 'best company in town' in every country and region where it operates.Toyota Motor Corporation works to develop and manufacture innovative, safe and high-quality products and services that create happiness by providing mobility for all. We believe that true achievement comes from supporting our customers, partners, employees, and the communities in which we operate. Since our founding over 80 years ago in 1937, we have applied our Guiding Principles in pursuit of a safer, greener and more inclusive society. Today, as we transform into a mobility company developing connected, automated, shared and electrified technologies, we also remain true to our Guiding Principles and many of the United Nations' Sustainable Development Goals to help realize an ever-better world, where everyone is free to move.SDGs Initiatives https://global.toyota/en/sustainability/sdgs/ Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, August 7, 2025 - (JCN Newswire via SeaPRwire.com) - Customers continue to choose Mitsubishi Heavy Industries as their preferred heat pump! For the third consecutive year, Mitsubishi Heavy Industries Heat Pumps NZ has proudly been awarded the People’s Choice Award by independent consumer advocacy group Consumer, recognising our commitment to quality, reliability and customer satisfaction. In Consumer’s latest independent survey of over 1,500 heat pump owners across New Zealand, we achieved an impressive 93% reliability score and 92% overall customer satisfaction, securing our place as the People’s Choice for Heat Pumps once again in 2025. This recognition reflects the continued trust that Kiwis place in our products to keep their homes cosy and comfortable year-round – and their vote of confidence means the world to us. “At Mitsubishi Heavy Industries Heat Pumps, we are humbled to be selected once again as the recipients of People’s Choice Award” comments Akihiro Nakajima, Managing Director of MHINZ. “As a business that strives to deliver products that combine cutting-edge technology with unmatched reliability, we are proud to have once again met the expectations of our customers in New Zealand. We are deeply grateful for their trust and positive feedback, as well as the opportunity to provide them with comfort at home all year around.” What is the People’s Choice Award The People’s Choice Award from Consumer NZ highlights brands that consistently deliver exceptional value, performance and satisfaction. It’s based entirely on independent consumer feedback, with no input from manufacturers or brands, ensuring complete transparency, credibility and integrity on behalf of participating consumers. As part of the survey process, heat pump owners are asked a range of detailed questions about their most recent heat pump purchase, including: The reliability and performance of their unit Any problems or faults and how they were resolved Their overall satisfaction (rated on a 0–10 scale) How likely they are to repurchase the same brand in future To be awarded People’s Choice, a brand must significantly outperform others across all key metrics, and Consumer NZ only grants the award when results are statistically robust and meaningful. Backed by Independent Testing Consumer NZ is a non-profit organisation that has been advocating for New Zealanders since 1959. Known for its rigorous product testing, mystery shopping and consumer rights education, Consumer NZ exists to help Kiwis make confident purchasing decisions and push for a fairer marketplace. Thank You, New Zealand! We’re incredibly grateful to our customers for continuing to choose Mitsubishi Heavy Industries. Your loyalty and satisfaction are what drive us to keep innovating, improving and delivering products that perform when it matters most. For powerful, energy-efficient comfort that Kiwis trust – go with Mitsubishi Heavy Industries Heat Pumps. Copyright 2025 JCN Newswire via SeaPRwire.com.

HONG KONG, Aug 7, 2025 - (ACN Newswire via SeaPRwire.com) - FWD Group Holdings Ltd ('FWD'; 1828.HK) today announced, under its exclusive 'FWD Private' brand, the completion of a high-net-worth (HNW) hub in Asia and the full deployment of a new FWD Private Lounge in Hong Kong.Leveraging FWD Group's strong network, FWD's HNW business operates out of three jurisdictions: Hong Kong, Singapore and Bermuda, with both onshore and offshore insurance solutions for HNW and ultra HNW customers worldwide.FWD Private, established in 2023, offers comprehensive legacy planning solutions and services for HNW and ultra HNW individuals. The FWD Private Lounge, located in the prime commercial district in Hong Kong, is inspired by the tourbillon - a symbol of time and precision.Ken Lau, Managing Director of Greater China and Hong Kong Chief Executive Officer, FWD, said, "The completion of the HNW hub reflects our long-term vision and reinforces FWD's position as a trusted partner in wealth and legacy planning across Asia and beyond. Building on our strong foundation in Hong Kong, and our ability now to service other markets including Southeast Asia and the Middle East, we're well-positioned to navigate diverse markets and tailor solutions that empower customers and their families to truly celebrate living."In Bermuda and Singapore, FWD Private recently launched Imperial Fortune – an indexed universal life (IUL) product that combines uncapped index returns with a minimum guaranteed point to point return of 2.3% per annum. FWD Hong Kong also launched its own IUL product, which was among the first wave of offerings in the market, in response to recent regulatory guidance from the Insurance Authority and Hong Kong Monetary Authority.Shelyne Shum, Chief Partnership Distribution Officer who leads the strategic partnership business for FWD in Hong Kong and for FWD Private, said, "Through FWD Private, we've built a compelling proposition anchored in time-to-market agility, product and service innovation, and exceptional client experience. The FWD Private Lounge is designed for preferred partners to host exclusive engagements and deliver a refined, personalised experience to our customers."FWD Private's products are primarily distributed via international brokers across Hong Kong, Singapore, Dubai and Switzerland, who provide personalised services and innovative wealth planning solutions to HNW and ultra HNW customers worldwide. FWD Private operates in Bermuda under FWD Life Insurance Company (Bermuda) Limited. A Singapore branch was established in 2024.About FWD GroupFWD Group is a pan-Asian life and health insurance business that serves approximately 30 million customers across 10 markets, including BRI Life in Indonesia. FWD's customer-led and tech-enabled approach aims to deliver innovative propositions, easy-to-understand products and a simpler insurance experience. Established in 2013, the company operates in some of the fastest-growing insurance markets in the world with a vision of changing the way people feel about insurance. FWD Group is listed on the Main Board of The Stock Exchange of Hong Kong Limited under the stock code 1828.For more information, please visit www.fwd.comAbout FWD PrivateFWD Private is a new horizon in legacy planning for high-net-worth individuals.Dedicated to the growth, preservation and protection of wealth, FWD Private brings an innovative approach and fresh perspective to its customised solutions in wealth planning, giving customers an unparalleled experience.With its hub in Asia, FWD Private's cultural understanding ensures that the challenges of managing customers' wealth is navigated with meticulous attention to detail, supported by digital infrastructure that provides the flexibility and dynamism that customers desire.As a distinct yet integrated part of the overall FWD Group, FWD Private benefits from FWD Group's financial strength, stability and investments in digital innovation.For more information, please visit www.fwdprivate.com Copyright 2025 JCN Newswire via SeaPRwire.com.

HONG KONG, Aug 7, 2025 - (ACN Newswire via SeaPRwire.com) - The 2025 World Robot Conference (WRC), themed “Empowering Robots with Intelligence, Enhancing Embodied Intelligence”, will officially kick off on August 8 at the Beijing Yichuang International Convention and Exhibition Center. As the largest edition to date, WRC 2025 serves as both a comprehensive review of the past decade of industry development and a full-spectrum preview of the first commercial year of humanoid robotics.This year’s event will welcome over 200 leading robotics companies from China and abroad, showcasing more than 1,500 exhibits, including 100+ global product debuts in humanoid robotics, core components, industrial automation, and service robotics. Three themed exhibition halls—Innovation, Application, and Technology—will illustrate the full integration of hardware and real-world application.1. Portfolio Companies Showcase Cutting-Edge Advances in Embodied IntelligenceAs a leader in smart infrastructure asset services in China, Shoucheng Holdings (0697.HK) will play a key role at WRC 2025, with seven of its core portfolio companies jointly exhibiting breakthroughs across humanoid robots, hardware modules, smart sensing systems, and foundation models. These companies represent one of the most complete “embodied intelligence ecosystems” in the industry today, with innovations spanning industrial automation, service collaboration, and education & research.Unitree Robotics: The world’s first company to retail high-performance quadruped robots and realize industry-scale adoption, with leading global shipments of both quadruped and humanoid robots.Booster Robotics: Developer of humanoid robots, operating systems, and toolchains focused on accelerating embodied intelligence deployment.Galbot: A general-purpose robotics company leveraging multi-modal embodied AI foundation models, already deployed across commercial, industrial, and medical settings.Galaxea-AI: Specializes in foundational AI models and embodied robotics research and development.Noetix Robotics: Focuses on general-purpose AGI bodies, bionic systems, and embodied operating systems.X Square Robot: Among the first in China to build end-to-end embodied AI models trained on real-world interaction data, enabling precision manipulation by general-purpose robots.Beijing Humanoid Robot Innovation Center: The first Chinese company to offer full-stack embodied intelligence hardware & software solutions; co-founded by Shoucheng Holdings. Its platforms “Tiangong” (humanoid robot base) and “Huisi Kaiwu” (embodied AI platform) aim to lead global innovation and application.2. Hosting Core VC Forum: Building a Capital × Technology Convergence PlatformOn August 10, Shoucheng Holdings will host one of the most anticipated VC forums of WRC 2025—the 2025 Robotics Venture Capital Forum—co-organized with its industry community platform CanPlus, and supported by Kechuangban Daily and others. The forum will spotlight the theme of “The First Year of Mass Production for Robotics.”As an early mover in robotics investment, Shoucheng Holdings has built a full-cycle support system integrating equity investment, financing, deployment, and ecosystem incubation. Backed by the Beijing Robotics Industry Development Investment Fund, its industrial parks and infrastructure platforms help drive ecosystem collaboration and commercialization. This strong foundation enables Shoucheng to represent the VC sector and take the lead in shaping capital–technology convergence for robotics.The forum will gather founders of top Chinese robotics companies, investors, and research institutions for discussions on technical evolution, financing environments, and commercial implementation. Two high-profile lists will be announced onsite:2025 Top 20 Most Investable Robotics Companies in China2025 Top 30 Most Promising Growth Robotics Companies3. Enabling Scaled Deployment Through Industrial CapitalUnder its dual-engine strategy of capital operation + asset integration, Shoucheng Holdings has invested in dozens of robotics innovators through its managed funds. Its portfolio spans embodied intelligence, industrial automation, surgical robotics, and AI-driven perception and control.As a co-manager of the Beijing Robotics Industry Development Investment Fund, Shoucheng continues to promote alignment between technology and scenarios, capital and policy, accelerating the journey from lab to market, from prototype to scaled delivery.Event Details:WRC 2025: August 8–12, Beijing Yichuang International Convention and Exhibition CenterVC Forum: August 10 (afternoon), 2F Sub-Forum HallPosted by All Way Success Company Limited for Shoucheng Holdings www.shouchengholdings.com [HKSE:0697, FRA:SHVA, OTCPK:SHNHF] Copyright 2025 JCN Newswire via SeaPRwire.com.

TOKYO, Japan, August 6, 2025 - (JCN Newswire via SeaPRwire.com) – Honda today announced that the Fastport eQuad, an all-electric micromobility vehicle for last-mile delivery, has won the Red Dot: Best of the Best 2025 award in the Design Concept competition of the Red Dot Design Award*1. Moreover, two electric motorcycle concept models, the EV Fun Concept and the EV Urban Concept, were each named a Red Dot winner in the same competition, and the concept movie for the Honda V3 motorcycle engine, titled “New V3 Engine Concept Teaser,” was named the Red Dot winner in the Brand & Communication Design competition. About the Honda award-winning models and concept movieFastport eQuadThe Fastport eQuad is a single-rider micromobility delivery vehicle that supplements the rider's pedaling power with electric motor assistance. The Fastport eQuad realizes a powerful, smooth, quiet and zero-emission ride by combining a pedal-by-wire system, which electronically transmits the rider’s pedaling input to the driving force, with a pedal-assist powertrain, which boosts the rider’s pedaling with electric power. Honda designed the Fastport eQuad as a micromobility vehicle for use in bicycle lanes*2, enabling companies to improve the speed and efficiency of logistics in urban areas with complex traffic environments and heavy traffic congestion. Full-scale mass production of the Fastport eQuad is scheduled to begin in the summer of 2026 at a U.S. Honda facility.Key design featuresThe Fastport eQuad not only features a sleek design, but it is also thoughtfully engineered to ensure harmony with the real-world environments where it will be used. While using a bicycle as a motif, the design effectively incorporates transparent materials to enable the rider to intuitively recognize pedestrians and other road conditions in the surrounding area. The clear windshield ensures excellent visibility for the rider while also providing a view of the rider from the outside. A translucent cargo container was adopted to reduce the visual volume of the Fastport eQuad. EV Fun ConceptThe EV Fun Concept is Honda’s first electric sports model and is being developed as a next-generation electric motorcycle that offers a new sensation of quiet riding and an emotional feeling unique to electric motorcycles. In addition to the high level of “riding, turning, and stopping” created by long-developed Honda motorcycle technologies, the new quiet, vibration-free ride that is only possible with electric power and the slim, easy-to-manage chassis package realized by its fixed battery will provide a new emotional experience that is very different to internal combustion engine (ICE) motorcycles. The production model based on this concept model will be a naked sports model equivalent to a mid-sized (ICE) motorcycle and is scheduled to go on sale before the end of the current fiscal year (ending March 31, 2026) as the first Honda electric sports model equipped with a fixed battery. Key design featuresThe EV Fun Concept features a slim and seamless design that expresses its quiet yet overwhelming acceleration and sporty riding performance. By reducing the volume of the area where a gas tank would have been for an ICE model, a dynamic and horizontally-oriented silhouette was realized. The EV Fun Concept was designed as a bike that is not bound by existing motorcycle categories. The functional beauty was highlighted through the combination of a sleek body and mechanical functional parts.EV Urban ConceptThe EV Urban Concept reconstructs from scratch the Honda vision of what urban electric mobility should be. Featuring an intuitive human-machine interface (HMI) and the fusion of software and hardware, the EV Urban Concept offers a new experience for riders. The goal of Honda is to offer the freedom of mobility to as many customers as possible and to expand possibilities in each customer’s life through enhanced mobility. Key design featuresBased on the design direction for Honda electric motorcycles — the Precision of Intrinsic Design — the design team strived to create an essential and exquisite styling design realized by refining the functionality. Featuring minimalist and sophisticated styling that blends in with the urban landscape, the EV Urban Concept offers a new UX through the fusion of software and hardware, embodying the Honda vision of near-future mobility that cooperates and resonates with people and society. Honda V3 motorcycle engine with an electrical compressorIn order to create attractive motorcycle products that go beyond customer expectations, Honda is developing the world’s first*3 V3 motorcycle engine with an electrical compressor. By controlling compression of the intake air irrespective of engine rpm, high-response torque can be delivered even from lower rpm. In addition, the adoption of the engineering design that does not require an intercooler for the cooling of the compressors allows a high degree of freedom for component layout within the limited space available on a motorcycle, which can be leveraged to achieve a concentration of the mass and reduction of the vehicle weight. Key features of the concept movie, “New V3 Engine Concept Teaser”This concept movie showcases the journey of technological innovation Honda has pursued through continuous challenges in the field of motorcycle technologies, as well as the development process for the world’s first V3 motorcycle engine with an electrical compressor. With a rhythmically structured narrative, the movie deliberately incorporates glitch effects that momentarily disrupt the image to stimulate the viewer’s curiosity and anticipation. In the final scene of the movie, the actual sound of the electric compressor is used to convey a sense of excitement and momentum of the development toward the practical application to products and evoke high expectations for the future riding experiences this engine will offer. To powerfully express the “genuine commitment of Honda to carve out the future,” all individuals featured in this movie are real Honda engineers. Through the use of authentic footage showing countless discussions and repeated prototyping that took place at the site of the development, the movie production team strived to convey the passion and ambition Honda put into the development. Concept movie, “New V3 Engine Concept Teaser”Comments by Toshinobu Minami, Managing Director, Chief Operating Officer, Design Center, Honda R&D Co., Ltd.“We are deeply honored to receive the award not only in the Design Concept competition, following last year’s recognition for the Honda 0 Series, but also in the Brand & Communication competition of the globally recognized Red Dot Design Award. We believe this recognition reflects the high regard for the ongoing initiatives of Honda Design that continues to create new value while striving to gain deep insights into changes happening in our business environment, the times and diverse lifestyles of people. Honda will pursue designs as well as a wide range of new value creation to continue to offer mobility products that bring surprise and inspiration to people’s daily lives.”Honda Design award historyhttps://global.honda/jp/design/work/#award (Japanese)https://global.honda/en/design/work/#award (English)*1 The Red Dot Award was founded in 1955 and has become one of the most respected design awards worldwide. The award is administered by Design Zentrum Nordrhein Westfalen in Essen, Germany. For the Product Design competition, 51 categories of industrial products are judged on 9 criteria including the degree of innovation, functionality, durability and ergonomics.*2 The definition and standards for “bicycle lanes” vary by country. The Fastport eQuad is designed for bicycle lanes as defined by U.S. and European traffic systems, which may differ from the definition in the Japanese traffic system.*3 Honda internal research Copyright 2025 JCN Newswire via SeaPRwire.com.